Viewing all customer Discussions for:

15-001 Channel Balance Shoe, 1-1/8" Depth

I need two block and Tackle balances with standard bottom and top pieces without wings for a non-tilt sash window. Picture 6941 above shows a complete balance taken out of the window and underneath it is the spring that came out of the other balance when the cord broke. (The other pictures are to sh ... (cont.)

I have three windows that have damage to one or both of their channel balances or plastic end attachments and they need to be replaced. I will send in three different requests as to not get the pictures mixed up. Here is the first set of pictures for the biggest window. The channel balance says 2 ... (cont.)

Hello, I'm hoping you can help me with some replacement parts. The balances are Nuprime by Season-All. The metal body is 26 7/16" long X 1/2" wide X 5/8" deep. They are stamped "2620". I have attached several photos of the nylon end caps with dimensions. The top sash guide appears to be product ... (cont.)

What replacement would you recommend for this? Stamped number is 2740. Thank you.

Trying to verify the correct balance and dash guide for my PGT windows

Hi, I am in need of eight replacement channel balance assemblies. The length of the metal channel is 44 inches long, The window weight is 47 pounds, the top fitting is your number 19-002 and the bottom fitting is your number 15-001. Please send price and manufacturing time.

Hi these, Would you be able to identify these parts ? They look the same to me but they have different numbers. Thank you ! George

I need to identify and order replacement for windows using this balancer. If you need more information please let me know.

Need help in finding the proper guides. Windows are all the same height from frame to frame edge. The top side is pointed with tiny wings. The bottom. Edge rounded.

I please help us find replacement parts. The window sash is approx 51 wide by 28 high the numbers on the channel balance are 25-9 AA CMC 7 Also 61-259

My existing channel length is 28 inches, 1/2 inch wide ans has 2730 BSI DL stamped. Need to find a replacement for it. Let me know what is your replacement part number.

I need 2 replacement window channel balances Stamp on current atrium window 34-4 AA CMC 4 Length 33" Shoes 5/8" & 1 1/4" Can you tell me which one I need to purchase please and thank you ?

Looking for a replacement for the 29 inch lenght - 10/16 inch width channel balance for non-tilt window Length:29 inches Width: 10/16 inch Markings: 28 3 DW CMC 10

I need to identify and replace this balance. Channel length is 29" inches.

PGT SINGLE HUNG BALANCERS NEEDED #6SHSTKR INKED ON BALANCE: 23-2 DW CMC 4 THANKS VERY MUCH, BOB

The metal channel measures 27". The stamp found on the hardware is 2630.

Looks to me like this is either a S351 or an S390.I am stumped on the foot as it looks like mine measures 1 1/16", but one foot on the above part numbers is 1" and the other is 1 1/8".There are definitely no wing tabs on either of the top or foot piece.Can you provide some guidance. Pictures attache ... (cont.)

I only have a couple of damaged balances and the rest are missing from the windows all together. They are 29" long, and 9/16" wide. I have two windows that have the 2830 size, and 3 windows that have the 2820. Will you please help me determine what hardware I need to repair these windows? The wi ... (cont.)

Unit is 22" long, stamping reads 2140.

Looking for replacement Atrium Sash window channel balance. Original part has markings '16 3 JW CMC 7' as shown in picture. Can you provide me with the proper replacement part number?