Viewing all customer Discussions for:

18-124P Top Sash Guide Pair, Rollyson

I need the 37" balance springs identified, and need the plastics retainer on the top of the dash. Thanks, Jarred

Can you verify if your top sash guide pair 18-124P is what I need? Hoping those would get a lot of my windows in working order. If I find I also need to replace any channel balances, do you carry one that would work?

I need 37" side balances with the plastic tops. I included a photo of the broken tops.

I am looking for balancers and sash guides for an double hung non-tilt window of unknown brand. The balancer is stamped with 27 4 CALDWELL DM and measures 28" from end to end, excluding the plastic ends. Pictures are attached to show the balancer and the ends. Do you have a replacement balancer that ... (cont.)

We have many windows that have issues in this house that was built in 1993

i'm looking to replace many channel balances in the widows in my home. Photos attached are of one set. 1/2"w 24"long #23 B BSI. Do you have replacements for these? Thanks for your help! Jackie

Across the top is 1 5/8 inches Length 1 1/2 inches Width 3/4 inches The window is about 23 years old. The channel balance number is 2830

I am looking for window channel balance assemblies for two windows. Attached are pictures of my existing channel balance assembly. Don't know if they are sided or not, this one came from the left side of my window. The metal channel measures 31 inches in length between the plastic pieces. The width ... (cont.)

We have Rollyson windows that were installed by Ryan homes when our home was built in 1995. We need replacement parts for some of the windows after 20 years. We need top sash guides

This part is on top side of the slide window, but I have no idea what the name is. It came off when I opened one. Help would greatly appreciated.

My rental property, a townhouse, was built in 1988. A few of my window sashes has this mysterious part, which I can't identify. I don't know the manufacture of the windows. I also went to Home Depot, but they could not help. This part closes the bottom sash's balance channel, much like a cap. Th ... (cont.)

Dear Swisco. I am looking a replacement for a 31" long Channel Balance. It is 3/4" wide. It had a 3030 stamped on it. I will need 4. I am also for a replacement for a 33" long Channel Balance. It is 3/4" wide. It has 3230 painted in blue. I will need 4. Finally I need a replace for pict ... (cont.)

I think I found the Rollyson bead on your site but am having issues find channel balance and how to install them. Attached pictures above. Guessing that they should not stick up above the window like picture when trying to operate. Window is hard to move up and down and almost impossible to get b ... (cont.)

Trying to identify the proper channel balance for replacement. My current balance is stamped with 18D. So it looks like I need a 19": Series 371 seems to be closest but may not be exact. The bottom plastic piece is likely 15-005 (those measurements are the same as my existing piece), but I am h ... (cont.)

These channel balances are 1/2"x 30 3/4" long. The printed number on the balances is 3030. I need one left and one right side with all clips springs strings complete. Which one do I need.

Hi, Your website is great - pictures and videos are really helpful! Half of the windows in my 30 year old house have at least one busted window track. I'm attempting to repair one window and if successful will do the others. Starting with replacing channel balance in 35w x 19h kitchen ... (cont.)

I have several windows in varying states of disrepair. Ballasts, Ballast Caps (the plastic cap that the ballast rests on on the top of the window), the seal on the sides and the bottom of the window... broken plastic retainer that holds the glass in, etc.. Any help is appreciated Thanks!! Steven ... (cont.)

How do you remove the window to be able to install the replacement parts and re-install the window. It would be helpful for a step by step description. Thank you

About a month ago I ordered and received S380-31 (31" Series 380 Channel Balance). It was installed and works. I find today that the top plastic sash guide is broken. What is the replacement part and no. ? Thank you.

I am looking to repair two broken channel balances. The stamp on each reads, "30 3 DK Caldwell". Can you confirm if product code, "S380-31" 3030 is correct replacement part? If so, can you advise on what are correct clips that work with them? Any suggestion greatly appreciated. Vr Michae ... (cont.)