Viewing all customer Discussions for:

26-448 T-Pivot Bar, 2-5/8"

We have 15 windows VHT Colony SH 3060 that are not working due to the strings on both sides of the windows have come out and the windows will not stay open by themselves. We would like to order the parts needed to have the windows work. Can you please provide the parts we need to order? ... (cont.)

I have at least on that is broken. Please let me know where I can find a replacement.

I have a few of these broken. Overall length is 28.5". My name is Christian. Thanks a lot!

I have an odd balance. Kind of like a channel balance without the actual channel. Got a spring, string, and then like a 3/16 plastic rod kind ofIt's not a sprial balance at all. It's almost like a channel balance but doesn't have the channel. Bunch of windows in an apartment like these ... (cont.)

I believe balancer is what I only needed. Condition for white piece and metal piece that attached to the window is OK.

Need to replace broken shoes for both window balances pat. 5.737.877. This is a picture of the broken shoe on one side. These are also the measurements of the shoe. Thanks.

Hi, I am looking for 2 replacement balances for my tilt windows. I have attached 4 pictures below. Thank You, Stacy

I would like to replace four 22.5' crossbow balances for tilted push up windows This crossbow balance comes with a 1" t shaped shoe. Do you have the series 795 26-200 for a 10 to 16 lbs window The length is 22.5 inches Exactly what I measured. So I, need a 22" The shoe is 1" The spring ... (cont.)

Left side coil balance shoes of window at living room is broken Please find correct oneWindow brand name is "norandex" I didn't check weight of windowIt's hard to take out this window again to get weightBut it's heavy and I can tell you size 27"*36"

Good afternoon, I need help identifying these two parts. Balancer and clip that is attached to the window and inserts into balancer. Balancer has part #34B BSI TG CLIP # 23260

I do have 4 windows that uses the same balance , I need the balance and also the other parts , the shoe and pins I did buy the "S795-34" but it turned out it is bigger the window frame. so I think I picked the wrong one, or wrong size. please advise.

Balance has 28B BSI stamped on it. Single hung tilt window balance for vinyl window. Need two balances and two of the plastic piece sets.

Helllo, i'm in need of replacement balances ribbed 7/16 width with and screwed in attachment for the string. will need 2 of 32D and 2 of 34B looks like 15-230 lock shoes and 26-448 pivot bars

Looking for replacement balance

I have a older Swisco balance and need a replacement. Photo included. The overall length is 27.5" and the diameter of the spring is 3/8". The spring alone is 16". Please give me your replacement part number Thanks a lot MB

I need to replace four of these, so I need to know what is the item number where to buy them also, I need instructions on how to take the lower sash out and installation of the balance. Thank you, Andy

I Need winndow channel balance

Balance length is 28 and three-quarter inch top to bottom these are single hung windows there are no identifying marks on the glass or the frame or the windows themselves The metal is 28 inches it is stamped at 28 see the weight of the sash [the sash weighed 16 pounds]. The top connects with a big p ... (cont.)

Help Identifying What Part I Need!I have several vinyl window balances that are broken and need replacing. The problem is that I do not know who made these windows, only that they were manufactured sometime in 2006. The old balances look like the rod and tackle type. I have viewed your video on how ... (cont.)

I have a set of 32" channel balances I cannot seem to locate. Can you help please? - "32C" ribbed 1/2" channel balances (Similar to S795 Series, but ribbed) - The T lock shoe is 15/16" - 1" wide, and 7/16" thick. I need 1 set (2 pcs) quoted please Thanks.