Viewing all customer Discussions for:

15-004 Winged Channel Balance Shoe, 1-3/32" Depth

Can you tell me what the difference is between the 380 and the 385 series? I see the shoe has different numbers but they look the same in the picture. Mine are stamped 1720 and are 17 3/4" long. I need 4 of them. Thank you, Bill.

The 1/2" Channel Balance looks like a 380 or 385. The top guide is certain, but the bottom guide doesn't look like either. The metal part is stamped with B.S.I. and 1010; it is 11" long. The window is 25 years old. I ordered this same part from you a number of years ago, both for this window ... (cont.)

Hello, I need to order the correct channel balance. This is 1/2 width, and 36 inch long. on the balance it self it has the 34 4 K CALDWELL Mark. Looks to be the 36" 380 Channel balance but i cant find the 344 option. Please let me know what I should order, here are some pictures

believe I have a 33" 380 series. Faint tamp of 32-2 BSI. See enclosed pics.

I am having trouble finding an exact replacement for the support channel balances. I will attach some pictures of the ends and maybe you can give me the correct parts #. The rods are 1/2" X 31" and are stamped 3030. Thank You

I'd like to correctly identify the replacement window channel balance. Attached are pictures of the broken part I need to replace. 9/16 channel width, 30 inch length It seems to me Series 380 or 385 should work, but would like to make sure. Thanks. Peter H.

Please help, need to know what I should buy for replacement: 26 4 FO caldwell 27" long

Thanks for posting! Before I can offer an applicable replacement for this channel balance, I just need to know a bit more information about the bottom attachment. Please take a look at our 15-004 and 15-005 channel balance shoes, and note their depths. As you can see, they are 1-3/32" deep and 1" de ... (cont.)

Please help, need to know what I should buy for replacement.

I am in need of a replacement channel Balance, I am attaching photos of the broken one. This is a channel balance with a length of 32" (w/o guides), width of 1/2" and a depth of 9/16 " with hemmed channel edges. The numbers printed on the balance are 31 5 CX CMC 7 The top guide ha ... (cont.)

I need new balances. Markings are 23c USB. 25" long. metal to metal is 24"

My home has many windows. I have had to replace two sets of channel balances so far, and now I have to replace another set. Previously, I used series 385 tops and shoes because those looked most like the originals. However, the tabs are thinner on the replacements than on the original balances; ... (cont.)

I think I need a Series 385 33" length. I am not sure about the shoe whether it is a 15-004 or an 15-005 or other. I am not able to see a discernible difference to be sure I am getting the correct part. How can I tell them correctly to order? There is no number on the old balance. ... (cont.)

I have the 27 series of balance in my windows but none of them have ever been the correct spring tension to either keep them up or pull them down without a strain, I used your calculator to determine the proper weight but I don't want to mess up on the proper ends, can I show you one of my old balan ... (cont.)

I'd like to identify the proper replacement parts for my non-tilt aluminum window built by Florida Extruders in 2003. Enclosed are pix of the proper parts. I'm assuming the spring comes installed in the unit. I've enclosed a few pix...I figure the part number would be S380-29 for the balance, and 18 ... (cont.)

25 4 JP CALDWELL is stamped on the channel which measures 26" in length. I think it is a 15-001 but measures 1.25 in both directions.and mine has wings that measure 1" across. A question: how do you get to the measured drawings besides the links in the discussions? the window weights 20# ... (cont.)

Hi, I own a condo that was built in 2006. I need to replace the window balancer and need your help in identifing the exact type of what we have, so i can buy a new one that will fit the window. I measured the length of the balancer and it's 33". i am attaching photos to best show what we need. ... (cont.)

It is 29",metal only, and approx. 30.5" including plastic. The part number is 2830Z. I don't know the company name. Thank you for your help.

I need 2 window balances for a NUAIR window on a home built in 2005 with 1/2 inch channel width, 35 inch length and the following stamp: 34-9 CA2 CMC 4. I think I need Series 380 or 385, but I'm not sure about the shoe size. Please advise.

Need help with ordering the right part for one window. Part # 2730 BSI. Total length is 29". See pics. I would replace them in a pair. Thanks Ted