Viewing all customer Discussions for:

26-150 Cam Pivot Pair

Used in bottom of window on the sides as a guide when the window is raised or lowered

Otherwise seems OK

I need one of these. Norco sash Windows installed in 1992 Thanks

Looking to find about a dozen left and right side. A good portion of the ones a broke in a home I'm repairing.

I need to replace a balance tube for the bottom sash of a double hung window. I have a picture of the part number attached. I also need to replace the clutch and the locking mechanism for the bottom sash. The biggest priority is finding out what window this is because there were no identification m ... (cont.)

We are trying to location Cam pivots for a Lincoln window size 5/8" wide by 1 3/16"

I believe the windows are vintage 2001 Norco. Provided pics of balance model and type of lift lock??. They are tilt in top and bottom.

I need to order a few of these metal pieces. They are breaking off my windows. I need left and right side. These are Loewen double hung windows. Thank you.

I am working on a home that has these window sashes and one of the windows is missing the aluminum piece that mounts to he window frame for the sash to catch. Where or how would I get another one of these "catches" for this sash? I've included pictures of the existing one.

Believed to be Booneville windows

I cannot find this pivot pin anywhere.

I recently purchased the slide balances from you but discovered several RH pivots are broken. The attached photos show the intact LH part. I can't find one close to this. The brand is Weathershield. The 30HD slide balances are an exact match except for the mounting holes location.Thanks for any h ... (cont.)

I need to replace 2 inverted balances. They are 35? long and have 15-197 terminal on them. I can not locate a pivot pin that looks like mine. The right side pin (looking from the inside) is broken. I?ve attached pictures of the left side pin and markings on the balances. Oddly, 3 of the 4 balanc ... (cont.)

We are replacing window jambs on Marvin windows that were installed in 1982 that are made with vinyl and a spring installed inside. We now have all of the vinyl window jambs for the house, but upon looking at the working mechanism while removing one of the windows one of the pivot cams broke. I'm af ... (cont.)

I will be ordering series 751 in both 32 TG and 32 HD for my Weather Shield double hung, wood, tilt Windows . I do not know the length of the balance but they are stamped with 32 TG and 32 HD.I also need knife point cam tilt pivot pins. I don't see an exact match on your web site so attached are ... (cont.)

Left and right tilts pins needed for LePage Windows (mfg. in Canada). There are no names, numbers or markings on the piece. Height: 1 inch & 9/32 Width: 1 inch & 3/16 Depth: 5/16 The windows in my apartment were installed approx 6 years back.

Will need multiple sets of these jamb liners. Overall width is 4", length is approx 49" on long side, thickness is 1/2" except portion of liner that sash slides on, that is about 5/8". The liner is held in place by a metal bracket that seems to hold either side of liner by friction fit. Can send mor ... (cont.)

I need parts for two different types of windows. 1. need the plastic clip for the bottom of the sash on double hung window. 2. need new springs for a track system where the windows no longer stay up. Please advise. Thanks, John

Balance assembly for Marvin Tilt back, upper and lower sash. Stamped 28 HD and W 28HDThanks for your help.Peter

LOEWEN DOULBLE HUNG. ABOUT 20 TO 25 YEARS OLD .There is a left and a right. photo is left