Viewing all customer Discussions for:

15-005 Winged Channel Balance Shoe, 1" Depth

Please assist identifying the correct part to order, 2 are needed. Also, on another window with the same problem, the person that installed the shutters put them too deep in the frame, and there is no way to pop the window out. Is there any solution to this you are aware of, other than removing the ... (cont.)

I need to replace 5 windows (10 ea)on these channel balance units. Part Number on channel, 32 4 DQ Channel Length, 33 in Channel Top, see Photo attached (19-005)? Bottom Shoe, see Photo attached (15-004 or 15-005)

I need Channel Balance Caldwell: CB 68CALD-30-3 with attachments CB90005-CALDW and CB 90007-CALDW assembled. Do you have them? If Yes, could you give price with shipment and handling. Thank you very much, Michael

Hi, I have measured that the length of the channel balance is 24”, and the width is 0.5”, the weight code is 2340. It seems that I need S372-24, am I right? I am not sure if my top and shoe match your top 19-004 and shoe 15-031. Thanks for your help. Your website is just awesome! ... (cont.)

I need a 1/2" wide channel balance, 28 inches long for a non-tilt Atrium window. I need the shoe and top attached. I think the part I need is a Product Code: S380-28. Do you think that is correct? I also need a take out clip and a top sash guide and don't know what parts to get for the ones picture ... (cont.)

Could you tell me what is the difference between the 380 and the 385 channel balance ? They look the same to me and I can't tell which one to order. Thank you, Karen

Hi there, can you please help me determine which is the correct channel balance replacement for this? Thanks!

Hi, Im Frank. I would like to purchase 4 pcs of this kind of balance. It has a 2030 etched on it. Thanks

I think mine are either style 380 or 385. The number stamped on the side is 2690 and I did not see that listed..... will need for 3 or 4 windows..... thanks Otto

I need to order a pair of replacement channel balances for my window. I think I need 380 Channel Balance with 19-005 and 15-005 for a 26" balance. Can you take a look at the attached photos to confirm this is correct? Thank you so much, Darin

This balance is for a 3' x 5' aluminum single hung window. The metal channel of the balance measures 27". The stamp on the balance reads 26 4 FN CALDWELL. Do you sell a replacement? Thanks, Zack

I know I have the right balancer length and width (21" long and 9/16 wide), one set is stamped 2020 and the other 2040 (2 types of windows). Can't quite tell if I have the right top and shoe, I think its 19-005 and 15-005. Can you tel from these photos? Was goint to order your S380-21 thanks! ... (cont.)

Length 26 inches Width 9/16 inches

I need balance channels for my windows. The channels are 30" long, the imprint number is 2950 BA st 30, and the shoe and top look like the ones on your video that ask for the 3 parts of information that you need. Could you tell me which is the part item of the balance channel that I need so I can or ... (cont.)

Channel balances. Measure 29" Marking: 28 4 EN Caldwell I think this is 15-005 Shoe. But could be 15-004 Shoe. I can not see what the difference is in these two. How quickly would these ship out if I were to order them today? Need quantity of 4.

Metal part is 27.00 inches long; Markings on part are "26 3 CALDWELL HM" Part looks like Series 385 Channel Balance, but I am not 100% sure. Hope you can identify it by the markings provided -- else I can send you a pix.

Can you please help me identify this balance? The balance length is 30" long and the marking states 29-6 AA CMC 11

Trying to identify this channel balance for replace/repair work. Channel identifier: 26 6 GW CMC 11 Total length is 27" Unsure how to figure out the spring weight/strength....weigh the window?

I'm looking for block & tackle replacement, the whole piece. The markings found on the existing part is : 23 5 Caldwell BM . The second piece marked: 23 4 Caldwell CM . Both have the same length: 24 inches long . I need two pieces total. Please quote me the price, too. Thanks. kc94030 ... (cont.)

the ones i have are 18-166 and 16-002. i also have the rivets and the rivet tool. the piece i need now goes on the bottom of the window on the metal piece.