Viewing all customer Discussions for:

15-005 Winged Channel Balance Shoe, 1" Depth

i need to replace multiple channell balances they are 33 inches in length and 1/2 inch wide.they are stamped 32 4 fo caldwell. they resemble four of your series. If you could let me know which ones to order that would be great. Thank you

there is a 2740d marking on 1 end. The balance is 28" long. It appears that S350-28 is the correct slide. 28" I included pictures and wanted to verify that it is compatible. I need 16 slides, but do not want to pay $12 to test 1 slide, when shipping for all 16 is around $23 Thanks. ... (cont.)

Hi - I have a non-tilt Fiberlux window that does not stay up. I have pictures and measurements of the channel balance as follows 1/2" wide - 22" long - Item No. 21 3 or C (not sure - pls see picture below) I have seen many videos, but there isn't one out there that shows how to replace the ... (cont.)

I need know what part needs to be order , I need the whole side rail with plastic part , metal bracket , spring .

We have included pictures of the balances for you. They are pretty mangled so hopefully you can still identify them. The metal section is 28" long and the only markings we found were the numbers 2740 and the letters B.S.I. on the metal section. I guess my one area of concern is that the one sh ... (cont.)

I have a channel balance that I need to replace. The numbers that are on the channel balance are as the subject says: 26 5 FV CMC 2.

i am not sure what these things are called ,these keep the window in balance,one is 55 cm long has marking on it as follow;...[21 4 c? Caldwell] [? means scratched letter or number] the longer one has the marking [33 5 LS Caldwell]and is 33.5 inch long

Length = 29 inches. Stamped "28D" on metal. Appears to me that the top is 19-005 and the shoe is 15-005. But with them broken or attached, I have a hard time telling the difference. Also I have many broken on diffeent windows; windows are all the same height bu different widths. Is it bad to ... (cont.)

I have a balance with markings 26 DS 45 PT BSI. The metal channel measures 27" by 9/16". The window measures 27" tall by 50" wide and is very heavy, Maimi-Dade code hurricane impact version. It has 2 springs, one inside the other, looks like your 385 series. Any chance you can match it? Thanks. M ... (cont.)

Hi I would like to know if you have the following window balance available: The balance is stamped 1540. It is 16 inches long not including the top and bottom attachments. The width is 1/2 inch. Attached are the photos of the actual balance and serial #. Thank you.

need a set of sash weights for a vinyl window- early 90's - Viking brand? old part is labeled "26 4 AN CALDWELL" - do you have these? I can send photos as well if needed? Thank you , Luke

Have some questions on the 380 series 29" length. I have Eleven Harcar windows approx age 24 years. Current balance channels are "hemmed" construction. Yours don't appear to be "hemmed", any problem there? Stamp on side of channel is 29 1 A I. What is the corresponding weight stamp for that mark ... (cont.)

We have a Linder window that won't stay up. It appears that there aren't any "rails" that would guide the window up and down / hold it in place. Basically the window is just kind of sitting loose in the frame. (We have NO idea how this happened, but we think it must've been like this when we boug ... (cont.)

I am looking for sash balances. What I need is a 2690R 34 Do you have these and if so how much are they? I am looking for 6 of them. Thanks, Rick

Hi, I need replacement balances. I believe I need either Series 351 or Series 390 but can't really tell the difference. The metal channel length is 27". I have not weighed the sash but it is 33"w X 25"h, farily sizeable. Help needed to order correct parts. I also need Take Out Clips, which I' ... (cont.)

Hi I have a channel balance measuring 29 inches in length. About 1/2" wide. Back if sash reads 27 4 11 gw cmc. Can't find the exact length in your catalog. There is a white cord in the inner base and spring. Thanks Cathy

Can't seem to find this one. The dimensions are 1 and 3/4" long, 5/8" wide. Top square is 3/8" wide by 1/4" high First hole from bottom is 5/8" and an additional 1/2" between the two holes measured from center of holes I am replacing Caldwell balances as well, the marking on it is 17 3 with n ... (cont.)

I was wondering if you have this part (2130X). The length is 22" (metal part). Thanks, Yuri

Hi My channel is 25" long and has a width of 1/2" and has B.S.I. 2430 stamped on it.

I need to replace two channel balances. Both are labeled 26 4 FP Caldwell. They are 27 inches long. Pictures of the plastic attachments are attached. Thank you for the helpful video on how to remove the channel balance.