Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

Need access to screw holes in bottom of window. Mechanism won't secure to fiberglass frame, .

I am looking for casement window cranks for left and right opening windows. The following markings are on the original crank: 45035-RH, TRUTH, RH, 3.

Need a replacement window crank. Caradco part Gear is stripped. Crank is on right side of window Opens from left side to right. Will probably need to replace more .

Truth brand, need new hardware for encasement windows.

HelloI have some old Bonneville casement windows that need hinges and operators replacedI need 8 hinges (see picture) and one set of left and right-hand operators for both operator types. By inside of elbow on notes I mean where the interior bend in the arm starts from the long end (not the gear end ... (cont.)

These were Peachtree windows that were put in about 35 years ago. As you can see from the photos it opens out to the left. The number on the mechanism is 2081. And the wrds on the mechanism are Entry Gard TRUTH

What is the black pivoting piece called? It is for a Milgaard window. Do you carry those parts? I don't know the exact dimensions, but approximately 2 inches long. It is meant to fit into a metal channel in the frame.

I'm looking for replacement hinges for the left and right side windows.

Hello can you pls advise what part this is? It's the bottom track window hinge that is rusted. Measurements: Track is 10 inches Bar connecting under the crank is 5.5 inches Bar mounted under the window frame is 7.5 inches approx

Looking to match and order these. Any suggestions would be helpful

The part is difficult to photograph since I need to remove the casement window from its frame. This part is a black nylon part in the bottom corner of the casement that slides on a track for one to remove the window. The top corner is similar. The photo of the shim in the corner of the window demo ... (cont.)

Hi,I need to change my window crank assemble and would like to be sure i have the right one. It looks like Truth Hardware Dyad crank 5 inch, part 39-090 but i would like to be sure before i order it. Could you help identify it. I haven't removed it from the casement since without it i can't close th ... (cont.)

Need for bottom of vinyl casement . This is hinge right when inside looking out

hello! I am a homeowner. bought house 6 months ago. can't find stickers, etching or anything to identify window brand. numbers on hardware: 9D501 and 9DD00P. please help. THANK YOU!!

I'm looking for a upper window arm 10" long.

I do, or do not, need all of these parts, but there is one piece that I need. Here is a picture of the assembly in another of the windows we have. A Swisco rep showed me some of your hinges including the 39-004 and the -048, and I was so excited that you found parts that looked like what we needed ... (cont.)

Casement Window, bottom hinge, x 1 10" BOTTOM TRACK 11-3/8 WINDOW TRACK 5-1/2" ARM

Can you help to identify the hinge and operator hardware in the attached photos? It appears that the hinges could be sprung because the gap between the window and jamb on the left side(outdoor view) is about 1/4" and the right side is up against the jamb. The opening hardware is operating properl ... (cont.)

The black glide in the upper portion of the photo is showing wear. What is the part number to replace the section that it is attached to?

Hello, I am looking to see if you have some replacement parts for some windows. The part numbers on the window slots are : 358-1R 358-1L