Viewing all customer Discussions for:

15-029 Winged Channel Balance Shoe, 7/8" Depth

Metal channel measurements: 29" long X 9/16" wide X 5/8" deep. Number stamped on channel: 28 B. Thank you for any help you can give me.

I need to replace two non-tilt channel balances.Here are the specifics I have:- Stamp: 28C- Channel length (channel only): 29"- Channel depth: 1/2"- Channel width: 1/2" (measures 9/16 actual)

28B USB

These balancers are 30" and stamped 2950 BSI

BUILDERS WINDOWS ...16 YEARS AGO INSTALLED NEED JUST 1 CHANNEL BALANCE & 1 CLIP ON INSIDE WINDOW

Hello, Im trying to identify my balance and the top and bottom that are correct. The balance is 29"L 9/16"wide and 1/2' deep. The shoe depth is 7/8" Pictures of the ends are attached. Thanks for your help.

need one set for this window 2830 they are 30 in long

30 inch long, stamped with 2930 VS1 1B Channel measures 5/8 from top (open side of channel to bottom outside) and .614 across the top opening of the channel

Hi- The channel balance is 30" long X 9/16" wide. It has 2 stamps; 2950 and BS1. After reading several posts in the discussion section and reviewing the balance accessories section, I found that the balance top matches the dimensions of item 19-005 and the shoe matches item 15-029 (7/8" Depth). Ple ... (cont.)

2920 B.S. I. Stamped . 1/2 channel, 30 inch long channel ( metal part)

Hello, We would like to replace the sash balancers and bubble seal for all windows in our home. We need 14 balancers and 25 feet of bubble seal. The balancers we have are 30 inches with 2920 for a 14lb non tilt window. The channel top is winged and the channel show is winged. The show appears to ... (cont.)

I'd like to order 4 series 380 assemblies, but using the 15-029 bottom shoe. Current parts are stamped 2930. Channel metal length is 30".

Hi, I am replacing my window channel balancers (2930) and need to know which slides I need to order (see pics). Thank You, Joe

Looking to purchase (12) balances with a winged top and a 7/8" shoe. Option 1420.

Hi there, Not sure if I have selected the correct part, 380, 1110, for this 12 " balance channel. Could you head me in the right direction please? Regards, Paulette

Need replacement balance although the old balance is stamped 28-G-70 the metal part of the balamce is 29" long

2930 EE B.S.I.(numbers on channel) the channel is 1/2", metal length is 30"

The channel balancer has a number on it "3440" The window weighs 23.5 lbs. and is 34 1/8 wide x 36 5/8 (3/4) high 6 ea. Channel Balance assemblies with 3440 rail with top end 19-005 and custom bottom shoe 15-029

Hi There,I follow the guide and found that S380-29 fits what I need with a slight difference, S380-29 shoe width is 1" (15-005) but mine is 7/8"(15-029). Do you guys have one with that shoe width?Thanks,Jesus

I Have in my cart S380-30 and S380-35 but my plastic piece at bottom of the balance measures 7/8 not one inch and I read some comments that I may need 029 (from Memory) on bottom and you have to make up. Please let me know about this. Also the bottom `Bubble Seal", please see photo, is not exactly l ... (cont.)