Viewing all customer Discussions for:

15-029 Winged Channel Balance Shoe, 7/8" Depth

We suspect that these original balances were too weak to work properly. All the houses in our development used the same identical window, except ours. We have double pane glass, but we suspect the contractor used the same balances as for the lighter windows. That's why I included the actual weig ... (cont.)

I've attached pictures of my balancer. I measured my original balance and it was 29 inches metal to metal. I see that the number "28c" has no bearing on the final balance. I need 10 replacements for 28c and two for 28f (second is a bigger window).

I'm trying to purchase the correct parts to fix my windows. The first attempt at the local place didn't work. I'm fixing two windows so I would like 4 window balances and the correct plastic fittings. Would you help me? The metal sash measures 28 7/8ths. The window weighs 13 lbs but was also hard t ... (cont.)

I need new channel balances. the length of the metal is 30" and the width is 1/2". The marking reads 29 3 B.S.I 0L The window weight is about 20 lbs Window is non-tilt On the shopping section, it looks like either an S380 or S385 but I can't tell the difference

I'm having trouble positively identifying my window balance ends. Stamp = 3330 Channel length = 34" Channel width = 9/16" Top end is flat and is winged Bottom shoe depth = 7/8 Bottom end is also winged Based on the catalog, my best guess is: Series 371 with the 19-031 top and 15-005 bottom. ht ... (cont.)

Please assist with the part I need. This measured 35" and had the marking 3440

attached photos provide all that I know, windows might be Pella and are from 1984-ish. They are double pane, aluminum single hung and non-tilt. This is from 30 x 57 size window and I need the entire thing (with block and tackle) if I got that correct. There were too many options for me to figure it ... (cont.)

I need two replacement balances. The stamp number is 3435 BSI. Pictures provided. Can you help me? Thanks, Phil

1) Request special order for 6 (Six) 29" Series 380 Channel Balances be made to replace my original Keystone Channel Balances. 2) Original Keystone model label attached. 3) Request Stamp Option 2830 (sash weighs 20 lbs); Keystone stamp marked "28C" just above winged shoe. 4) Install with "Channel B ... (cont.)

We need new channel balances for our Alcan window. They are 37 inches long. We need two. Can you provide a price and availability? Thank you,Fred

I am looking for balancers 2930 2920 And 2910 Please help identify Thank you, Richard

28f USB balance rod and spring replacement 29 inch long for impact window shoe measures 7/8

Greetings- I am needing to replace eight of our Rollyson window channel balances. These are all the same, with the metal section measuring 30 15/16" in length. Please find attached photos showing the plastic ends as well as the model identification. I can call with a credit card once I hear back fro ... (cont.)

The shoe is not quite one inch. Which one?

Length 31"

I have balances with wings on the top and wings on the bottom. But my shoe is less than one inch deep. A swisco rep says I can get that as a custom shoe. I need 30 of these, 29" long channels, my sash weighs 14.2 pounds. They're all the same size windows. And I need the top sash guide too. ... (cont.)

Hi there, Please confirm which channel balance to order. The length 29" There is a marking on the stem "28C" Regards, Dru

Hi, Home owner looking for a pair of non-tilt channel balances as replacement for a broken one. I have looked at your series 380 (S380-29) 2870 for 40# sash as a potential. I have included data below and images of balance parts for your team to check for the best fit. The only exception to the meas ... (cont.)

Good Morning, Looking to order replacement channel balances. Was informed that a bottom shoe less than an inch would make them custom balances. There is a 28 D stamp, meaning I would need 2840. I will need a quantity of (4). Let me know if you need anything else. George.

Caen't determine bottom depth due to wear. It's either a 380 or 385 depending on depth. Any help is appriciated. Measured depth is ~ 0.900 inches. Eric