Viewing all customer Discussions for:

36-004-10 10" Stainless Steel 2 Bar Hinge Set

Hello, I have a left-swing casement window that is not closing nor sealing properly, I think because the bracket that slides in the track on the bottom of the window, on the hinged-side of the window, is broken and therefore does not fit in the track properly anymore. I have attached pictures both o ... (cont.)

Simonton casements crank out window (R.H. SWING), the plastic top hinge broke allowing the window to fall out a little. Need to find the entire top bracket that holds the plastic pivot hinge and also the top arm if possible. I would appreciate any help you can offer.ThanksDon

And I have a Silverline casement window 70NCW1?.. has it is installed now, I have 5.189 ft.² of clear open space. I need at least 5.7 ft.². I need to acquire whatever hardware is necessary to make the window open further. Please see the pictures attached.

See attached photos Need the hinges and brackets shown for Left and Right casements. Stainless preferred.

In the first photo showing a right hand arm, please let me know what the replacement part would be. The following three photos are the left side window. The window is disengaged on the bottom and needs all new parts. Please let me know what parts are necessary. Regarding all these parts, what is a ... (cont.)

Are replacement parts available and would you have replacement instructions?

I need to replace two window crank sets with a Stainless Steel version. I live in a salt water environment.The long arm measurement is 10", Short Arm 5" the Brade is 8", and the Base Plate is 5".I need your product description so I may order these parts.Thanks Les

Works with casement windows

My order number was 1759286,these were parts of Andersen - straight arm operator and Tandem stash Lock. These parts did not fit and I returned it back. I have uploaded the pictures of the parts that is currently on my Window and looking for the correct replacement parts. Please let me know the corr ... (cont.)

I have large truth casement windows and the left window's hinge has broken on the bottom. Per Truth Rep. they no longer make the replacement part no. 14.96 15.30.38.081 or 14.96 15.30.38.082. I will send a photo of existing working hinges on right window if that will help. I so hope you can offer ... (cont.)

Looking for matching hinges Not sure of window manufacturer

Casement window bottom hinge mechanism is broken off sliding pivot point. Upper is ok. Need help identifying. Did not see any numbers.

Pls see the rusted sliding hinge support for my casement window. I'm using the 39-253L Maxim Dual Arm Operator, still mount, and need to replace both sliding support arms (top and bottom) and the underneath the window mounted tracks the sliding arms fit into. Totally appreciate your diligence in he ... (cont.)

my last post asked about 3 part versus 3 part hinge, but I think I get it now that I need the 2 part, the other parts are on the crank mechanism. I am wondering are there any other parts I may need, I"m concerned about the part that connects to the Encore Dyad Sill Mount Operator (39-220B), LH on th ... (cont.)

There are no identification numbers on the parts. That I can see but I need lower right and left.

I need the left and right hinge assembly, including the hinge arm, hinge slide etc. for two (2) Simonton vinyl awning windows. Sash size is 22x34. Also need new tie bars for both windows. All parts need to be stainless steel as this is a beach house.

Please have these parts....Im looking for bottom hinge,sash bracket,and Casement track

please give me the part number i need to order replacement cranks. thanks greg

I have a crank window. Unfortunately, I do not know the brand. The photo I've included shows the crank and all hardware. Once I crank the window open, the screw jumps off of the track and I am unable to close it all the way from the inside. I have to have someone to push it in from the back. The num ... (cont.)

I need help in maintaining my casement window. It makes a lot of cracking noise when opening and closing. I don't see any adjusting screws. I also need to replace some of the locking guilds that are broken. I need help with the part number, please?