Viewing all customer Discussions for:

15-259 Coil Balance Pivot Shoe

I have all seers windows double hung 45" x 51 by 9300 series White double hung I'm looking for the plastic parts for the canhope you can help. Thanks Bob Breiner

Need to purchase this replacement part for the right side of my window

Hi, I need replacement balances and I'm not sure which ones to buy. Please advise on which balances would best suit this picture shown. Thank you, Genevieve

Howdy,I need the replacement parts above for what I believe are Simonton Reflection 5500 windows (not sure though). I need (6) of the plastic lower parts (IMG_6168 through IMG-6171) that receive the cam, and two sets of the top release latches (left and right) as pictured in IMG_6172. Please cont ... (cont.)

We are looking to find replacements for the pieces shown below as directed by customer service. The white plastic piece is broken in half. The other half is stuck in the window frame. I will need three sets please.

I bought 4 15-192 CertainTeed Pivot Springs to replace my Simonton broken pivot springs in a double hung Simonton window. The replacement cam on the inside in the new pivot does not fit the pivit bar on my Simonton window, so I exchanged the new u-shaped cam with the old cam. It still does not slide ... (cont.)

During my attempt to clean the windows I tilted them out to far and all of the plastic components broke. I have all the the metal rollers. They are not needed. I'm going to attempt to send another email to you to show more pic's, hopefully to help you identify the parts I need. Thank you. Jeff If ... (cont.)

Side mounted spring loaded rolled steel ribbon tensioners for an impact window Manufacturer unknown

I need both right and left coil balances for a set of 4 identical windows. Window tag included. I also need a single tilt latch. Any help would be greatly appreciated. I am quite capable of replacing just need the correct parts.

I have Simonton brand windows with multiple units with broken pivot shoes. I'd like to replace them.

Hi, Went to clean my double hung Simonton windows and realized that all my balance assemblies in all windows are broke. 21 windows. The plastic piece that holds the metal pin connector cracked in half. I'll be fixing one at a time. For the first window, I'll need 4 total assemblies. The coil is 3/4 ... (cont.)

Hi, I need 2 balances matching these in the photo. Need 2 shoes and 2 of the pins that sit in the shoe. Only marking I see is 409 j on the metal band. On pin it says 0552 and 16. Thanks

(3) Spring Coil: 263-J (5) Cover Label: CertainTeed I think I should replace parts 1, 3, and 4 and not the cover (5) and the smooth roller (2) - unless you recommend otherwise. The measurements of 15-192 match my shoe but my shoe is mostly smooth on its exterior. Also my cam is not metal but tha ... (cont.)

I had theses windows put in 2008 when my wife was cleaning this she noticed the pivot shoe was broke I got it out I sent a picture of the bar code I'm not sure if I have to replace the pivot bars with the new pivot shoes Thanks for your help

coil balance & pivot bar parts

I have 4 windows that have broken balance springs. Will need replacement parts. If you have any installation guides or videos that would be helpful. Replacing both sides so will need 8 total

The Pivot Lock Shoes are broken on 4 sashes.

Would you mind helping me identify the exact pivot stop I need based on the photo attached? I would be ordering two for the same window and I would also like to kn ow if I need a right and left piece. Thank you

I need to replace the window balances. One is broken and obviously the window will not stay open. The window is a Simonton 33.75x60.5" double hung. I'm trying to figure out what balance will work for this window. They were installed in 2010.

SA 409 is stamped on the metal coil. what coil weight is needed for this 3/4 inch wide coil. and please let me know how much it costs.