Viewing all customer Discussions for:

33-067 3/8" Shoulder Screw, 5/16"-18 Thread

Where the crank connects to window torque the attachment is too big for new crank. What to do?

Original to 1970 house I believe. Crank handle is loose inside unit and will not screw back in, just loose. Windows don't open.

I need to replace hand crank and screws. For a crank out window.

The awning windows are installed in a home constructed in 1955. There are no patent or part numbers visible. The crank base is 6" tall, 1 3/4" deep at the base, and 1 " wide. The crank handle is 4 3/4" long. Looking to replace some missing units and need screws for others.

My right handed Pan Am Window crank looks like the 39-017. The top holes 1/2" apart and bottom holes 1 5/16" are the same as mine. The difference is between the top holes and bottom on the 39-017 are 5 1/4", mine are 5 1/8". The 2 3/8" arm on the 39-017 are 2 9/16" on mine and there are no threads. ... (cont.)

How does the arm of the crank attach to the hole in the arm of the window? Is it a threaded bushing with a screw?

I can get the window to open but I can not get it to close. The handle comes out of the operator.

The windows were installed in the then-new building in 1967. We believe they are Anderson windows. The frame is 23x39 We have 5 of these windows. If there is an option you may have, we'd like to try 1 out before purchasing the rest. I removed a different operator... Turns out, the first pics I s ... (cont.)

One section of arm has the number 2 stamped on it and the most extended part of arm has the number 78 punched on it.m Inside the housing is a Pat No. D-198 202 The arm extends 4 1/2 inches The housing is 6" from top to bottom It is dark in color I have ordered a crank from you before ... (cont.)

We have several Rusco crank operators that are broken or are about to fail. We need replacements as well as several of the aluminum, Phillips head, .375 wide shoulder by .500" Lg. shoulder screws that attach crank arms. Thank you.

Please identify window crank. I have found a lot that are close, but not the exact one yet.

We are looking for a replacement window crank for our window and 'think' you may have what we need.The house was built in 1975 - and there are no manufacturer labels on our present window cranks.The crank is for a (righ opening window) 5 inches from top to bottom and the bottom holes are not straigh ... (cont.)

need help identifying replacement.

Patio window operator No part number on it

I have a 1976 vintage FL home with single pane PanAm awning windows. The problem is several windows will not stay up when cranked fully closed. The proper closing panes snug up & under the panes when the operator is given the final 1/4 turn. I have three that sag down on one side when fully closed ... (cont.)

Hi, the screw which connects the operator arm to the window arm ??? has broken off and I cannot unscrew the head it is rusted on.The remainder of screw is in arm. No part numbers I see a 91 on pivot head Please, I need new part and connecting screw and strength to take off rusty head ... (cont.)

Greetings! My name is Tina Trousdell. My house was built in 1989 and the whole house has Pam AM windows with 11500-11 Pam AM cranks. The right window crank broke several years ago on one of the larger ones. (photo attached of the left side of the same window). The number on the crank is 1150-11. In ... (cont.)

10-8201 stamped inside of assembly. I assume this is called a right hand crank? I would like to order one right hand crank assy. And one left hand assy. If they work I will order about 15 of each right and left assy.

Hi, I have an old window crank with three screw holes. Your Pan/Am Daryl Window Crank looks similar except the screw holes do not match. Attached photos show my crank with a single screw on top and two screws, diagonally apart, on the bottom. Can I use your crank or do you have something that matche ... (cont.)

-as shown in pictures: The part that moves with the handle) is shaped to curve facing up. My original handles all have that part curved to face down. When my original part is closed nothing sticks out. When the 39-026 closes there are gear teeth sticking out and because of this I just can not close ... (cont.)