Viewing all customer Discussions for:

15-015 Pivot Shoe, 17/32" Thick

Also need the screw that holds the balance in place on this piece. Thanks, Pat

Hi, I am looking for some of replacement pivots. It looks like the dimensions are 1 1/4" wide, 2" long, 1/2" deep. Thanks, Troy

The measurement Width 11/4 Depth 9/16 Height: just under 2 inches (see photo) Sent from previous email Would the replacement part be 15-118 I know it is a bit shorter But one person said length is not as important as width and depth It is a non-tilt window Ecker bought in 1983 Approx 30-40 lb Thank ... (cont.)

Can You identify items pictured. I will need 2 spiral tensioners & blocks that go in the channels. Total cost with shipping to Cherry Hill NJ 08002, or or you have local distributors where I can pick up to save shipping?Frank

I need two spiral window shoes, two pivots to find the shoes and the screw for the pvots

Please let me know if you have these. The spring piece is 1/2 inch in diameter and the white plastic piece is 2" Tall and 1/4 inch thick.

I need the spring loaded one and the plastic thing that it goes into.

looking for replacement part for the twisted metal flat lifter for the sash and the plastic connection to the sash. The image-2 shows the round hole that should have a blue plastic insert where the post from the sash engages.

9/16 thick 2 1/4 long 1 1/4 wide Better Built window

Hey this is Michael I'm a maintenance tech for a university. These are the original spiral balancers (with the black tip) and shoes (with the black slot) that I am trying to replace. Went to a local glass/window shop and they gave me these other ones (with the orange tip) and shoes (with the blue sl ... (cont.)

One is shorter than the other

Hello! I need help identifying the window part in the pictures attached. Any help would be greatly appreciated. Thank you!

Do you have replacement shoes like this?

Hi, I have multiple broken pivot shoes from vinyl windows built in the mid 90s. The windows use spiral balances and the shoes all look the same. I've looked through the parts list and it looks like I need 15-015 based on the thickness dimension of 17/32" but I'm concerned because the part I have do ... (cont.)

Help me find this spare part

Can you tell me what pivot shoe I need base on this photo

Hello, I am working on replacing some of my pivot shoes and am trying to understand if different shoes have different "weights" - in other words, are they are able to apply differing amount of locking force, or is that completely dependent on the width?

Need help identifying tilt operator part numbe. This one is not broken, but others are. Depth of cavity 1/2"

none

I haven't found any markings on this part, and I did look for it in your catalog, but didn't find quite the right part. The Windows are by ALUMAX, and were installed in 1997. Needless to say, the warranty is out-of-date. I have tried several window companies and they refuse to try to locate parts ... (cont.)