Viewing all customer Discussions for:

38-079 Casement Sash Lock Keeper

Hello! My husband and I just bought our first home, it was built in '81 and we believe these are still the original windows. I found Caradco listed on the current operator handles. We have multiple windows that are missing cranks and we also have some locks with no levers or levers that have fallen ... (cont.)

Need to replace the hardware including the guide under the window. Any help would be appreciated.

I now would like to replace the locks on my windows. Please advise if i need to also replace the part in IMG_2443. Tom's previous recommendation for the casement operators worked perfectly. Thank you in advance for your help again. Anne

The center to center distance between screws is 2 3/8". I remeasured the width and I believe your width of 2 9/16 is correct. The depth at the widest part is 1 1/8 and the depth where the screws by the latch lever is 1/2.

This is one of the non broken window lock latches. They are attached to the fixed window and latch the lock into the opposite window that opens from left to right similar to a dot using a hand crank.

Hi I have casement windows without the lock keepers. The mechanical part of the lock looks like the picture. What keeper goes with?

I bought the Swisco 38-097, 38-098, and 38-079 latches and keepers to replace Truth 40226 left and similar right latches and keepers. The Truth keepers align with the center of the latch. From observing the operation of the Swisco latches, it appears that the keeper should be offset from center. Is ... (cont.)

Hi! We are renovating our home, which was built in 1938. We are having difficulty finding matches for these. Are you able to help us identify them and hopefully purchase more? Thank you! Jordan

I'm looking to replace these with white ones. I can't find them anywhere and wonder if they were ever made in white. A direct replacement would be fine if I don't have to modify anything.

Hi, I'm pretty sure these are entry guard sash locks because the casement windows hardware is Entry Gard and they look very similar to your 38-097 product but mine are not quite as wide as that model. my width is more like approximately 2in wide. is there a part for me? I also need keepers for LH ... (cont.)

I am looking for the locking mechanism for an Andersen Casement Wood Window. The parts I have been able to find are missing a set of screw holes. It has the Truth Hardware logo stamped into it and has the numbers "40707" "30838 PN" and "40592984439910"

Hello, just trying to identify a replacement part or a substitute for this part. The arm is about 15.5" long. Can't find replacement. It is champagne/aluminum finish. Any help to identify the part and where i could order it would be appreciated. Thanks

Hi, I'm looking to replace these dated locks and cranks with something more modern. My husband will be replacing and is quite handy - I'm the leg work :).Rachel

I used your 39014 39013 operators they fit perfect house built 1970. Thank you

We have missing cranks for the Pine Craft Millwork windows as shown above. What do you have available for this style window? We also have levers (on side of window to open and close) that have broken off. Let me know. Thanks.

These are original windows on a home in Minneapolis, MN. Built in 1979. The only identifying marks are on the glass itself. Saying "C-11-77M Cardinal sigma 101" Any idea if you can get crank parts or window lock parts for this?

Can I buy online the Window latch 30838 PN in off white or almond or white? If so how much is it? If not, what is the window latch you can send with the same dimensions and closest to the attached photo of the latch that does not work?Thank you. Shawn

Please let me know which part/s I need to orderThanks

Hardware measures 3" x 2 5/8" x 3/4" thick. 4 screw holes 2 3/8" apart. Looking left and right hand latches. Thanks.

Hi, My lock piece broke of one of my windows. Can you tell me what part I should order for both the lock and hook. If you could please let me know that would be great!