Viewing all customer Discussions for:

39-025 Awning Window Crank Operator

Hello!I'm looking to replace my awning window operators in my sunroom. Out of our 8 windows in the sunroom, I believe only 3 work OK. The rest will open but not shut. I've been searching trying to find my replacement parts. Could you please direct me to the right type of replacement operators? I hav ... (cont.)

Molded into the bottom of the housing are the following: PAT. NO. 198202 U.S. and below that 2 R.H. RD. 1963 CAN.Distance from top screw hole to bottom screw hole: 5 1/4".Distance between bottom holes: 1 1/8"Length of operator link from joint to window (center of post to center of post): 2 9/16"Wind ... (cont.)

See old operator and new. Window won't close all the wayArlen

I'm looking for a replacement part for awning windows. I've found some online, but nothing seems To have that little nob on the end where the crank connects to the window piece. Looking for someone to point me in the right direction! These windows are old- the cottage was built in 1950- and poss ... (cont.)

I am looking to replace my existing crank operator (pictures enclosed). I believe it matches your part #39-025 white. The hole dimensions are exactly the same as your pictorial. I watched the video, and the only difference is where the lever arm connects to the other piece. Mine uses a protruding me ... (cont.)

I chewed two operators on n the parts site but the ones I need have only one screw hole Was hoping you could help me figure this out a you have done every time in the past. Thank you. mrscreenman

We have 9 multi-pane and 2 single-pane aluminum awning windows from Victor Windows in Philadelphia installed in our summer cottage on Lake Ontario. (The company is out of business.) I need several new operators. The old ones have the same specifications as your Items # 39-025 and 39-026 with one ... (cont.)

Hello Swisco TeamsI need some help to find a parts: I think will be AWNING WINDOW CRANK OPERATORProduct Code: 39-025 dark bronze and TORQUE BAR BEARING, NEUTRALProduct Code: 36-018EPlease see attached and let me know Thank youRegards Michael

Need to replace the entire white crank unit handle comes off n parts fell out

Unfortunately I see no numbers or markings on this mechanism. Dimensions top screw to bottom screw i measured as 5 1/2 inches. Looks like 1 5/16 from bottom screw to across to the other bottom screw. Hoping you have this replacement part.

Hello: I am in desperate need of two replacement crank operators for my porch casement window. They are Permaseal window. Any help would be greatly appreciated!

The first picture is what you just sent me and the second is a picture of the old operator that does not work anymore. I received a part from you that seemed to be the right one but there is a screw attached on the arm that can not be removed, thus I can't use it. Do you have an identical part to ... (cont.)

Need replacement operator for bathroom window

Hi Can you identify this crank and send me a replacement? Thanks

Replacement Operator and Screen Clip

The mounting holes are the same 5-1/4 and 1-1/8. But the linkage arm is 2-1/4. Will the 2-3/8 work or is there another operator number.

I ordered 3 #39-061 which do not fit my application. I did not look closely enough at the specs and will be returning them. I think I need 3) #39-025 instead. I did not see part 39-025 available in mill (silver). Could you verify #39-025 match the photos I have attached? Lastly, is 39-025 avail ... (cont.)

Don't know who made my awning windows in my sunroom. Have currently two broken window operators the rest are pretty old and in bad shape. I would really appreciate it if you can help me. If it might help I live in Crestwood Village III houses here built between 1965 & 1970.

Hello, we are looking for this window operator. It's from 1965. Do you carry it? Thank you, Mark Messner-Chaney

Top hole to bottom holes 5 1/4 inches Distance between bottom two holes is 1 1/8 inches The arm length from center of pivot point to screw attachment hole is 2 1/2 inches The screw hole appears to be 3/16 inch