Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

Hi This crank was on casement window. The dimensions seem the same when measured with Dimensions for 39-031 part But the holes are not the same. mine, as you can see has only 2 holes on each side The long arm measures 10 3/4 and the small arm is 47/16

I can replace the part myself if you have it. I can also supply more photos of the part Thank you in advance Bruce Frey

Hello, could you help identifying replacement parts for Truth Hardware part numbers 20544, 30744, and brown cover pictured? Thank you!

Looking for a replacement for this window operator. The branding is a little vague but as you can see in one of the pictures it does say entry gard and truth.

Double Casement. Left side crank handle is stripped. (From interior view) Home was built in 1993

Hello, I have this part I would need to identify and replace. Thank you, Robert

on crank hs two numbers L 31538 / on the back side 20755 / entrygard truth. looking for the operator shoe and track Thank You Jim

I need to replace one left hand and one right hand assembly

Need part crank is broken

Need to purchase right and left cranks for both of these units

hi would like to replace dual arm operator trying to identify correct replacement . thanks

The post will not stay in. I need entire crank like the picture. There is no name to be found anywhere to determine make of window. I hope u can help. Thank you. Vinnie

Entry guard window operator for crestline window numbers included are 20810 on the straight arm on the curved arm it's 30841L appears to be the operating arm is about 9 in long

I have a few casement windows in my house that need the crank system replaced. Really just looking for the gear mechanism if possible. Do they make comparable replacement parts for this model? Thank you in advance of your help!

Need to find replacement parts for this window crank. It has broken off and we cannot locate hardware that works for it.

gear broken

I have casement windows, circa 1982-84, that have cranks that have failed. I need both left and rights. From what I have found, US patent number 4.241.541 1982 and on the short arm is etched number 31538. Long arm is approx 9 1/2" and short arm approx 3 1/2" to swivel then 4"

I was thinking 39-156 39-107 39-114L Thoughts?

I have Semco windows and the crank operator appears to be the same brand. I am not sure of the gold gear mechanism. The window crank that you spin to open/close the window seems to have unscrewed itself from the unit, which now redners it uselss. Do i need to replace the entire piece, meaning, the o ... (cont.)

Attached are measurements. Label faded on operator, but lists as Truth. From available options, thinking 39-032 (and 39-031 for other side) would match but the 39-253RB/LB don't have the longer arm dimensions. Planning to order a couple to test out and then verify all are the same size (various wind ... (cont.)