Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

Crank operator has an R stamped on it, It is for the left facing window as seen from the interior. Also has the number 20810A stamped on it. Would like to replace this crank operator but not sure which item in your inventory is the best match. Thanks

I would like to make sure I am ordering the correct parts please. I was looking at 39-031 and 39-032. Also 39-107 for 1 cover and 39-205 for 2 cranks. Please let me know what you think.

Hi,I would just like to confirm the type of crank that I need to replace the broken one that I have. I believe I need the Caradco Window Crank, 9-1/2" 39-155 which swings out from left to right. Our window is 19" wide. Please confirm. I have sent photos of the operable working one on the left, but t ... (cont.)

We have about 7-8 windows that can't be opened and most of the windows are hard to operate. I want to replace the crank with handle and the arm that don't work. Also any other suggestion for making opening window smooth. I have posted the parts photos.

Good morning I can't find the part number for my window mechanism. Regards

Hi I'm Looking for the parts with code 31538 entry gard mechanism + internal handal and security clips

I ordered a casement operator arm for a window. In the first order, the operator arm was too long. I ordered a second unit, and the operator arm is the correct length, BUT it is mounted 90 degrees away from the window arm. How do I get the correct operator?

I have a window crank 9-1/2" with a 4-1/2 link arm not the 3-13/16" link arm. The window does not close all the way. I had ordered the 39-155 and the 39-156. Do you have the same crank except with the 4-1/2" link arm or very close to 4-1/2" link arm? The picture shows the old crank and the new c ... (cont.)

hello - i've uploaded pictures of the window hardware that i currently have installed in my house...i believe there is a left and right version, as i need the opposite of what is shown in the pictures, with the crank/cogs on the other side of the sill plate. hopefully you can identify this for me : ... (cont.)

Good Morning; Is item 39-031 a standard size for all casement windows?ThanksRay

I have 6 windows I need to replace the window cranks

Need this replacement part Delmas entry guard assembly 40754

Hello, Ordered Part #39-031. All the measurements match up, but the swing arm divots down, instead of up. It won't sit flush. Can you provide any advice? Thank you.

The above pictured Truth mechanism on my Marvin Bay window (left looking out from inside) casement has stopped working. I believe the Marvin serial number is 01 1G 00 OBA IGMAC, however, I'm not sure if the 00 are CC because it's really hard to see.

I need to replace hand cranks in 4 windows in my biome that was built in 1987. Two of the window cranks have the following numbers on. 20810 along with R30842 The two other windows that is part of a three window larger unit has only the numbers 20544 on them. This would need to be a right and left ... (cont.)

Need 3 brown covers and 3 mechanisms

We have Oldach windows in our home that was constructed in approx. 2000. Is it possible to purchase T-Handle cranks to replace our crank handles (attached photo of existing crank handle)? The existing handles have the number 45054 marked on the inside (it would be visible on attached photo 6454.jp ... (cont.)

Hi, I'm looking for 3 items for some older Kolbe casement windows (estimated installation is the 80's) that are structurally sound but need TLC. (1) See photo 1, looking for the weather stripping that fits in the kerf. Looks like it was bubble type (similar to 58-053?), but hard to tell because it ... (cont.)

Casement window with K&K on the cover. Back right if the gearbox appears to be stamped with 40572 or 40672. Right side hinge, left side lock. Worm gear and engaging helical gear are skipping. I'd like to purchase a new gearbox and a new handle please.

Truth Entryguard (20810) dual arm Operator