Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

Hello Would you please advise on which crank operators would fit my Truth arms. I was looking at the conversion kits but open to whichever will fit the new arms. Thank you

I am looking for window operators like this. I am wondering if the Caradco Window Crank, 9-1/2" Product Code: 39-155 Will work, even though it is different.

Truth Hardware 40942-A 31532 31512

Our crank just fell out! Please help and recommend what we should do. We want to use this window. Thank you

My handles have come off and the gears are spinning out when trying to close. I will actually need a few of these. Also wondering if you guys have screen assemblies? There are a couple windows that do not even have the frames thank you for your help.

our L hand operator is C-1081-101 with long arm S-1081-102 and short arm S-1081-56our R hand operator is C-1081-201 with long arm S-1081-202 and short arm S-1081-56are these operators still available?

I need t new window crank mecahnism. Thie is an Anderson Casement. Window from 1989-90 above kitchen sink. Has Truth HW Logo and a #30744 on one part. I need both left and right. The glass window is 18.5" and the longest metal arm is about 9". The crank just does not crank it anymore - handle ... (cont.)

The crank is stamped with a 32 on the left side and a 04 on the right side.

Please see my attached picture and advise if these can be ordered. The 11 3/8" track the operator arm attaches to, and the 2 7/8" bracket (left side of photo)

Hello, I have customer with Marvin windows possibly 20 to 30 years old and various styles.I need window cranks LH & RH with crank handles and covers.I need proper parts for these, do you carry them ?Ed

I may have ordered the wrong part39-147It's 4.5"measurement of the crank unit.5 in across on plastic cover.Do you have this part?

I have 6 windows that that have these cranks they will no longer crank out or in. Please identify part so I can replace the window cranks when I use the crank it just spins.

We have confirmed an issue with the crank on a monarch window as being the outside most gear as having small section of it stripped to wear when the crank is being operated it reaches a point where it slips and the gears are no longer locked together

Needing a replacement crank assembly for Crestline window. Short arm had numbers 20810 stamped and is 4 3/8" long. Long arm is 9 1/2" long with numbers 40754 stamped. Entry Guard TRUTH is also stamped on the long arm. Locking latches are on the righthand side of the window (right hand side standing ... (cont.)

Looking to identify part numbers. I believe the manufacturer is TRUTH. any help would be appreciated. There are 7 parts.. uploading them in two posts since the site only accepts 5 at a time. Tx

Hello, I live in a coastal area and have discovered corroded window assembly parts. I'd like to do a full replacement of everything for 3 windows. Window sizes 24, 23, and 22.5 * Dual Arm plate size is 4.5 inches where the crank arm attaches. * Below the Dual Arm plate is another hinge with a f ... (cont.)

We have a handful of windows that we believe just need replacement parts. The cranks are broke, don't lock etc. Could you provide assistance?Thank you,Don

I have this entry gard window that the crank arm is broken, looking for the correct replacement. Old hardware hast the following numbers on the arms 20810, 30842R and 30472RH

Hi. I've got a casement window that I can no longer get to close with the crank handle. It opens fine. I've taken the cover off and it appears the part that's circled no long stays set when turning to close the window. The only markings I see on the operator at "Truth" and then the numbers "31" o ... (cont.)

We have several window cranks that need to be replaced. The window says scherer. Window crank has number 45179 on it