Viewing all customer Discussions for:

39-083 Dual Arm Crank, 21-1/2"

We are in need of a crank out awning design window mechanism. It appears the burrs on the mechanisn are worn and the window will not crank out or back in. There are two operators on this window (for design sake). Do you carry these? The name on the crank is NORCO which we know is pretty universal in ... (cont.)

We know we need to replace the operator on this window, but we would like to replace it with a handle that folds in. We think this is a Vetter window. Do have any window operators that have folding handles they would work?

Hi, I need to replace this bronze Truth window operator. It looks to be 21.5" wide and the arms have a part number of 30895A. I also need a handle for this operator and two additional handles. Thanks, Stephen

Hello, I own a 1985 Weather Shield awning window and our crank system -- not sure on proper phrase -- seems stripped and we need a new one it doesn't open and close properly anymore. The two arms that extended out get hung up. Attached is a photo and any help on getting a part that could be swapp ... (cont.)

How to replace Dual Arm Crank steps

Do you have a window operator like the attached?

It is not moving when I turn the handle.

Hi there , I need 2 left hand and 2 right hand operators

Please offer some assistance. Thank you

This is the crank for a casement window tht cranks up from the bottom the internal casting threads stripped out and it connects to the window with two slots and a cam lock retainer

These are the only parts I have the window is 28 inches wide. It is an Andersen window I guess I would need all parts to operate window maybe we can retrofit

Hi I need to replace my broken awning window operator and two locking latch keepers (lost). They are manufactured by Truth in white and brass finishes as shown in the pics. There are 4 arms in the operator about 6 inches long each.

The female threads inside system to hold the threaded cylinder are stripped. The male holding cylinder will not hold the crank in place to close the window. The complete mechanism needs to be replaced. Handle is fine.

The threaded crank fitting came loose on my casement window. is there a tool needed to tighten it?

Hi, Our awning window crank doesn't open/close the window. Do I need a whole new operator? The current operator is "Truth". The size is 21 1/2". The crank handle has a #45054 on it. I haven't taken it apart yet, I need to remove the window ledge to get at it so before I do, I want to be s ... (cont.)

i have 4 awning windows...all different sizes, and I dont know who manufactured them. all but 1 are stripped and can only be opened and closed by hand. they look like the one in your video demo. how do I measure for the right size replacements?

the crank only opens, can't return window. the brass insert nut has stripped out threads on housing, no way to repair existing housing. Found the word truth written on scissor bar and housing, the #45142 on housing and u.s. pat. 4505601. the scissor bar also has the # 30895A

THE LEVERS ARE BROKEN AND I THINK YOUR 39-069 IS THE REPLACEMENT, BUT CAN I REPLACE THE LEVER TYPE WITH A CRANK TYPE.

NEED TO REPLACE CRANK ASSEMBLY

Looking for replacement parts for this truth window operator.