Viewing all customer Discussions for:

Door & Window

If you can call to explain how to install I will appriciate.

Can you please help me find this part

Hi: I need to cahnge the awning system of a window in my work. I wiil send you pictures of it. I think is a 11" arms. The hole of the base are exactly the 7" and 6 1/8" inches.Gracias

side latch for crank style window. This part is mounted to the window section.

The window is about 35 years old and the crank is stripped. There is an E on the arm.

I need to know what window pivot lock show to order to replace the broken one.

attached is a pic of the plastic piece that connects to the spiral spring for the bottom sash. I need the plastic piece for the top sash. I am assumng it is the same. I can't send a pic since both sides have shattered. Assuming you have the part, I would also appreciate any advice you have on instal ... (cont.)

The windows were manufactured about 2003-04. The length of the metal channel is 27". The weight of the window sash is 19 lbs.

Metal channel width 9/16". Length 34 1/4". Identifying number on the part is 34B BSI. Balance shoe PAT# 4610108. Width 15/16" This is for a tilt window. Which is the bottom sash of the unit. I will need a total of 2 sets .. so 1 for each side of the window.

No numbers or name indicated on the existing parts. This is one of the two wheels for sliding window (3 x 4).

Attached are the two windows... both have the same equipment but one has a broken handle so I can not open it. I'd like to replace that broken one. If just the handle can be replaced then I want that part. If I have to replace the whole mechanism then I'd like to try and match it with the other o ... (cont.)

I need something more along the lines of: Similar to 55-029, but 5/8 on the left and 3/4 on the right. Thanks.

Forever storm door from 1975

Falls out of crank mechanism

Hello do you by chance know which latch this is? I am hoping to find and order a replacement for it. Your help is greatly appreciated!

I have a part number

Hi i need replacement channel balances for 2 windows. The 20 3 cp Caldwell is 21 inches and the 17 2 bp Caldwell is 18 inches ( measuring just the metal part). Both appear to be 1 3/32 at end. 2 questions: what parts do I need and should I replace both sides? thanks

Small version of my Casado 9-1/2 inch cranks

#6.0 35 Fhi 5232208

I need a 1/2 inch single hole window coil for a window that weighs 10.3 pounds