Viewing all customer Discussions for:

Door & Window

My holes are 5 inches apart. Thus, it seems that one of your standard products will work. Do you agree? Please see the pictures Thanks: Gene

Is it ok to use these wheels (81-166) as a replacement for metal wheel rollers of the same size and design?

I have a non tilt 29 inch long X 1/2 inch wide balance with a 19-002 channel balance top and a 15-003 bottom channel balance shoe. which balance should I order. the balance is stamped B.S.I. 2830

Looking for a more cost effective operator replacement.

I have several Marvin Window that are in need of having the balance replaced. I bought the house in 1990 with all of these Marvin windows installed by the prior owner. the balance has 16XHD stamped on it, the window wieghs 22.5 pounds. What would you recommend for replacement? Please note in pict ... (cont.)

looking for replacement handle for sliding glass door numbers of the door are SGD-R20-120BY 82 SERIES 8670 AAMA/NWWDA-101/IS.2-97 DONT have old lock

7442-3 is on the inside of the latch I think i the door was installed in 1998. Thank you.

Hello, I need some help identifying parts to fix several windows in my home. The issue(s) I am having is with regard to difficulty opening or lack of the window staying open without being propped up. I have attached two pictures. The first "Broken Part" shows one of the items damaged on the ... (cont.)

I need a replacement counter balance mechanism for an Andersen double-hung window. Here are the numbers I can find on the part that needs replacement: 11600-3 1600-3 11600-17 J16 5423 585 Also, if I want to replace both mechanisms, are left and right the same??? (the upper and lo ... (cont.)

Hello, Do you have this replacement part. Two pivot pins are needed. Thank you.

The window crank piece had broken and items from inside the unit are attached and shouldn't be.

What replacement part number do I need for a F65 837 11-87 sash balance?

I spoke with Andersen and they no longer sell parts. I need corner pieces for the 2852 window. If you have hatchet blade device for seating screen into window frame, I would be interested in that as well. I have attached a picture. The corner looks like the over-the-counter one on the bottom righ ... (cont.)

Hello, I have windows that are the Viwinco brand Double Hung new construction windows. I ordered 26-316 from your company(which seems to have many of the same dimensions) The 26-316 part that goes into the pivot lock shoe is too large and will not go into the shoe. I can't send a photo because all ... (cont.)

Hi, I need 20 of these metal vertical rollers. Metal rollers that mount vertically into extruded aluminum metal windows; metal wheels; Phillips screw holds the device in place. Thanks!

I have purchased the 39-025 window crank operator in the past but do I have to purchase the entire crank . The problem I am having is the crank handle seems to be stripped it turns but will not close the window it will only open the window

I need a new channel balance. Length - 29". Stamp is 28B. I think what I need is 29" Series 380 Channel Balance Product Code: S380-29. I am not sure which option I need based on the 28B. Thanks for your help.

I have recently purchased a house in Maine that I think has Peachtree windows. I can not find any markings or numbers on the windows; all of them are double hung (non-tiltable) The outside screens uses clips to hold them on and many of them are gone. Attached is a picture of one. It is metal; longe ... (cont.)

I think I have the correct channel balance. I don't know what weight to get. The only numbers I can find stamped are 296 USB..? Also the brand window is a Clearview.I chose the 30inch series 385 channel balance product code S385-30

I need to replace rollers on two doors with these markings on the door: PEACHTREE DOOR ATLANTA