Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

My Weathershield casement window installed in the 90's will no longer close all the way. I need the above parts I believe. Crank should be white. Do you have replacement parts? Crank has the numbers 45199 and operator has the word "TRUTH" and the numbers 31850. See pictures. Thanks for your help! ... (cont.)

This is the part number/name that I could obtain off the window hardware. Do you have these in stock? I need three of them and need to know how long it would take to get them shipped to me in Colorado Springs along with cost estimates. Thanks!

I am told by the manufacturer that i have a Atrium weatherlock 800 series which they no longer manufacturer. I am looking for 4 replacement handles and they suggested i contact you for assistance Thanks in advance Bill B

The window cranks open and close but will not close completely. Like it's off center or the crank does not crank enough to close the window. I'm thinking i need to replace the operator. The window is a Crestline. I have yet to see even the same type of handles as these windows have. Can you tell wha ... (cont.)

The casement window pictured here and used in this house was built in 1957. I am pretty sure that the windows are Biltwell from Dubuque, Iowa. At least the hardware has that as a stamp identifying the hardware as such. The arm is over 14" in length.

Looking for the replacement to the TRUTH hardware and the soft plastic foam filled seal I am holding. These are K/K Windows as seen on the crank cover. 25+ years old. I am reworking the wood but need seals to replace the old seals. HELP!

Hi, I have a window crank that needs to be replaced.could you help id'ing and quoting it if possible. Thank you tyler

Hello, Looking for two replacement window crank handles (only the handles are needed) - they are marked "19 45054" and look to have a brushed nickel finish. The windows that they go with were installed in late 2006 (to give you an idea of how old the parts are). opening is approximately 1/4 inch. ... (cont.)

Pictures are of the crank for Caradco awning windows marked with a part number(?) 45012. They are not the folding type and are held in by a setscrew. Can you suggest a replacement part?

I need a part for a roto roof window. It's the handle to open and close the window. It's truth 45013. Do you have anything that will work to make window functionable? I have a pic to help find this part. I need two of these. Will your part 39-379 work?Please contact me by phone or email with any qu ... (cont.)

We have three windows that are missing the cover and the Cranks the one window we have that has them I have attached a picture and it says enerpro on it. I'm hoping you can help me out and ship overnight Thanks Jackson H.

In need of a handle and arm for a bow window. The arm is 8 3/4" long. Looks like it can be all one piece. Also need the 4 screws and there is inserts that the screws go into. There are no numbers or name of the manufacturer on the window.

I'd like to get two of these operators and the corresponding handles. Thank you.

I'm thinking this is your part called Entrygard dual arm operator product code 39-032. It's truth hardware. Short arm has 20810 and 30842R on it. It's 4 inches and 7/16 long. The long arm is about 10 3/4. Do I need the short arm bracket as well? My problem is the window cranks out but not in. T ... (cont.)

numbers 30842r U.S. patent 4.241.541 CAN patent 350.432 pat. 1982 Ineed a new mechanism with handle and plastic cover to hide the mechanism.

The threaded crank fitting came loose on my casement window. is there a tool needed to tighten it?

I have an operator with part number 0P06-7533-08 on it. I have seen similar operators on the website but not this one. Production numbers are 10-31-13 133886

To Whom it May Concern, We have a K & K casement window that was installed 30 years ago and we need to replace the operator. The only number on the operator that I found was 40471. Any help you can provide would be greatly appreciated. Thank you for your time. Sincerely, Joe

It is a Truth brand, and the # I believe identifies it is 30744 although the following #'s were also on there, 40574 and 45108. The long arm is 9.5" in length. The crank to open'close is in the middle. Do you have a replacement for this? Sincerely, Sheila

I'm trying to find replacement hardware for 2 casement windows. The old mechanism's say Entry Guard and shows # 30744 on the arm. Can you ID from this? Please advise. Thank you, Tom