Viewing all customer Discussions for:

15-046 Pivot Shoe, 1/2" Thick

Need minimum (30) pcs for home. Part dimensions:2.128" long, 1.240" wide and .522" high. Hole for pivot pin is .315" x 215"

Hello, looking for this type of spiral balancer - if you carry it. I understand measurements would be needed for a more accurate product match, but I didn't see these types anywhere on your website? Unless I missed them.

hello, i have creation 1000 series windows in my home...dh-c20/dh-c40. i need pivot lock shoes....would your 15-046 be the right replacements?

The attached part is a picture of our Thermo Industries replacement Guardsman windows (1990) pivot shoe. Would you have pivot shoe to replace this part? We are in need of 20 pieces. We purchased our windows from Advanced Window Systems with a lifetime warranty. They no longer carry these windows. ... (cont.)

Please review the attached photos and may you please advise me on what you suggest I do in regards to this hardware and point me into the appropriate department on your website to purchase any hardware if any. Thank you in advance for your time

I have attached a photo of the pivot shoe. Here are the dimensions: Pivot Shoe 2" long 1 1/4" wide 1/2 inch thick Slot 7/16" long 1/4 " thick Key in slot +- 1/16 long and wide Spiral Balance 29" long 3/8" diameter I also need the part number of the proper tensioning tool T

I need to replace a pivot shoe the measurements are 2" x 1 1/4" x 1/2" thick. Not sure which one to buy. Could you help?

I have several thermo tite windows that the metal tilt in swivels have broken. These swivels accept the square metal posts on the bottom sides of the windows. How do i replace these and with which part?

Can you identify the pivot shoe I need? Used with 3/8" spiral channel balance. The closest I see is 15-046 but the height is 2" where mine is 1 5/8" to the tip. I am guessing the 2" one will work, but need advise. Thanks.

Window shoesvforbphillips single hung circa 1995

Existing pivot shoe is 1/2" thick, 1 1/4" wide and 2" high, same as Product Code: 15-046. Please verify that it fits a 33" SERIES 765 BALANCE (32-5).

hello i need 2 top spiral balances for the window attached. Can you let me know what part we need

Can you get me the part under the spiral? Thank You, ED

Thanks for your help! I have Alcoa single hung windows that have problem spiral balances, either locked up after 6 in of travel or making noise when closing the window. I have included two pictures of the balance. It is 29" long (plastic only) and I believe has a yellow color identifier (in pic ... (cont.)

part is 1 1/4" wide by 5/8" deep blue center

see photo

My window is vinyl, single sash, tilt in, 36"x60". Balance length is 27", width about 9/16"" or 8/16". I would like to replace the entire balance. The number on the back is SL 26 5 5/10/05. Appreciate your help.

What is the easiest way to put the window back in using 15-046 pivot shoes.Since the pivot shoe isn't u shape I am having a terrible time getting the pins back in the shoes. Thanks for your help with this issue.

We are planning to replace Pivot Lock Shoes for 3-5 Windows. But not sure about the exact part number. The approximate dimension is 1 1/4 x 1/2 x 2 ( W x D x L) Width: One and quarter inch Thickness : 1/2 inch Height: 1/2 inch Also, please let us know if you provide Windows Repair services. ... (cont.)

Do you still carry any Patriot window parts?I am looking for a replacement sash for a double hung window and a balance spring.If there is any chance you can help me I will forward more details.