Viewing all customer Discussions for:

15-047 Pivot Shoe, 5/8" Thick

Here's another one for you, I'll need a few to save these windows. Some of these slides have broken, and they all seem brittle. Do you have these?

See picture for parts that I need help on identifying to order replacement. The plastic "tabs" broke off on the balance shoe. Thank you very much for your time. ~Laura

Greetings, I think I need your Pivot Shoe 5/8/Thick (product code 15-047) However the demensions on mine do not match your drawing..........Close but no cigar... The dimensions that don't match are (1.) the 5/8 thickness measures 0.600 and (2.) the height of 2" measures 2 1/8. Hummm I think it will ... (cont.)

I'm in the process of repairing a Seasonall double hung tilt window. In the process of removing the broken sash I also broke a spiral balance and a pivot shoe as the balance suddenly retracted as I removed the window. I've measured the 5/8 26 inch red double pin tip spiral balance which I'll be ... (cont.)

I would to confirm that you have the following parts: 1.Lock shoes: see attached size of lock shoe. 2.Pivot bar: Specially the position for two screws. See attached for size of pivot bar. Thanks a lot,

I am looking to replace the balances and shoes in my title windows. My rods are 37" with red tips and 5/8 inches in diameter. The shoe stop is the part that I am having trouble finding on your site. I am not sure who manufactured my windows. There is some numbers on the back golf the shoe. I tri ... (cont.)

Hello, I think the measurement on this is 2 high x 1.25 wide by .5 deep. It looks most like the 15-046 but as you can see the center is blue. Do you know what pivot this is? I already bought some 15-154 but now see that my pivot does not have the blue part recessed. Thank you, Will ... (cont.)

MY WINDOS ARE ALUMINUM SO WILL THE 15-070 WORK IF I CUT A SECTION TO POP IN THE NEW SHOE THE DIMENSION ARE THE SAME 1 1/4 5/8 2"

Without Swisco's Web site I wouldn't be able to figure out visually how to repair and replace parts for my windows. I cannot thank you enough for the videos and pictures showing what to do. I have tilt, triple glass paned windows from Thermal Gard by Season-All the 400 Series that were installed ... (cont.)

My shoe appears to be 5/8" deep, 1.25" wide, 2" high. Has notch in slot black cam. It also has a SS screw which holds the end of the spiral in it. Do you make a shoe with a screw hole in it, I don't see any on your site

I am looking for replacement pivot shoe for aluminum tilt in window 1 1/4" wide 15/16" tall and 5/8" deep - would this be a 15-047

We need to replace the balance spirals in the windows at our school. During our local research your website was suggested. The pictures and description of the three options you have don't seem to fit the ones we need to replace. I've attached photos of a spiral from our windows and then a photo of ... (cont.)

I tried to identify a shoe I require and need your help. I did try to do this on your website but was not able to attach the pictures. Anyway, I am looking for about 10 of the shoes. The shoes are on replacement vinyl windows that are about 30 years old. The only name I could find ( on t ... (cont.)

I recently purchased 46 Pivot Shoes, Item Number 15-047, as replacements for my vinyl tilt windows. The windows are single hung, therefore only one sash tilts out. When the pivot bar is inserted into the cam and twisted, similar to that which will occur when the window is tilted outward, the sm ... (cont.)

we need to replace the broken piece and nylon part that is at the end of the spring for these windows. The spiral on your website has a black nylon thingy that is round and not slotted like the one we have . I have included 3 photos to show the missing and broken piece as well as the end of the wind ... (cont.)

I need 2 pivot lock shoes for my double hung windows. The parts broke and need to be replaced. The measurements (although not perfect because they had to be glued back together) are: 2" height, 1.25" width, 11/32" depth. hole size: 3/16" height, 5/16" width

pivot shoe is 2" high 1-1/4" inches wide and 5/8" thick and it works with pivot bar 26-040.

Can you please tell me which pivot shoe fits an Owens Corning window. The model on the window is: FDH. It measures: 2 1/8" long, 1/2" wide and I cannot get an accurate measurement accross the shoe while it is in the track. Sorry... Thanks

Dear Sir. I had Wintech Industries double hung tilt-in vinyl windows installed in 1997. I need to remove pivot shoes. The side jambs/rails have no cut outs. I tried your 75-069 jamb spreaders with no luck. Vinyl jambs are too ridge. Do you recommend I cut out a portion of the jamb to remove th ... (cont.)

Hi! So glad to have found this site. I ordered a spiral balance charging tool from you, but after it arrived I discovered that the shoe at the bottom of the balance was completely destroyed. I managed to pull it out of its slot at the bottom of the jamb so I could take a picture of it. It measur ... (cont.)