Viewing all customer Discussions for:

39-217 Single Arm Window Crank

need to replace the operator. crank just spins without gears moving. i have no idea what brand or model. i think these were somewhat custom made. this is for a casement window that is part of a "garden view" bay window

9" off set single arm 1/2 drop

I have Crestline 4-panel window that are 20+ years old. The two outside panels screw open while the inside panels are fixed. One of the panels is rotted. 2 of the handles have stripped (or so I believe) and will not turn to open. The panels are 54 X 12. Can you help me? Thanks.

The first 3 pictures are of what I call the left had window, the last 2 pictures are of what I call the right hand window. I need the new cranks for both windows. The numbers on the left hand plate are-45108, on the other side of the plate the # is 4. The # on the left arm is 40575. The #'s on the r ... (cont.)

It looks like the 39-216/7 would work for me. I need the left and right arms. The stamp on the plate says 45108 and the underside of the arm has 40575. Under the arm at the connection point to the plate the number starts out 313 and I can't see the rest. The dimension from the center to the end ... (cont.)

I am good to assume that this is the Truth EntryGard single arm? 39-216 and 39-218? Can I also replace the cover? I'm looking to move to white for the cover and handle.

crank stopped bringing window in. It is a Truth crank. 8 and 1/2" arm. part #40626 stamped on the arm

Need help identifying the correct single arm replacement 9 1/2 inch for home built in 1996 Truth hardware Vetter windows

Do I need a new mechanism.my name is Jack

Need window crank operator for 2 windows. Not sure what you need for measurements.

I'm looking for a replacement part for my window. Picture is attached. I don't know who made the windows, can anyone tell what replacement arm it is called.

Hello, I have a Pozzi window circa 1998. The crank needs to be replaced. Attached is an image. The arm is about 9.5" long. Can you help me? Hope so! Thanks, Joe

I have windows manufactured by a Canadian company, KML which was sold off to Anderson Windows about 10 years ago. Anderson no longer carries parts for these casement windows. I have several crank handle operators and locking mechanisms that have failed and I am looking for replacements. Can you o ... (cont.)

The only markings were on the window slide mechanism Truth Entry Gard 4038. I need the clips that hold the window crank worm gear mechanism in their receptacle. The two half moon pieces

45108 on operator body 40574 on single arm Need one left hand and one right hand. Arm is 8 1/2 inches from pivot to pivot Mounting screws arem4 inches apart

Greetings. Do you have this part for window. Thank you

Hello - your 39-217 single arm crank (operator) appears to be Truth # 15.94.00.002, if you can confirm this then this is the replacement that I need. It is Truth's SKU 800367.

Hi Looking for a replacement crank assembly - stamped with model #30830 - 1990 the windows were installed. Do you have something that would work for my setup? Thanks, Randy

I need two new cranks. One for the window shown in the photo and another for the opposite window that opens up the other way. This is a Milgard window from '97. Thank you

Hello - I have what I believe is a Truth operator for our casement window. Stamp number 40050 is on the arm extending from the operator to the window/track. Could you please direct me to the correct replacement operator? I also need a replacement crank handle, 5/16" Spline which has stamp 45240 ... (cont.)