Viewing all customer Discussions for:

15-111 Pivot Shoe, 1/2" Thick

Coils are 1/2" width. Possibly 33" long?Top and bottom balance support parts are both 1.25" width I can't find these parts anywhere. Please advise! Thank you!

Side metal slider that keep windows open

We are looking for replacement parts for some windows for a Customer. I am unfamiliar with these, but upon research it looks like the parts you have listed, could help us out. We are currently looking for pricing. And unsure of quantity at this time. I am not seeing any numbers or markings on ex ... (cont.)

Hi there, I have a window that won't stay open because the coils have snapped. It has 3 coils per side on each window. The markings on the coil show 33" P # 3.5 5232208 on it. The cover at the top has markings patent #s 5.232.208 - 5.365.638 - 6.584.644 B2 FAS # 10246Can you help me with the parts I ... (cont.)

1st picture-shows window label 2nd pic-pivot shoe or lock (not sure the correct terminology) Also need the coil springs that run from center sash side to bottom dash side. Need internal tilt latches R & L

My windows are about 30-40 years oldA few of my windows won't stay up.

I need two window spring kits

Hi! I'm looking to ID this coil cover. Its twin was broken and needs replacing

I'm in need of replacement parts for single hung sliding windows and instructions for installing please The glass /sash weighs 22 lbs so I will need the right coil springs too please send recommended parts and instructions for installation thank you

It looks like the springs on both sides of the window are broken. The channel is 1.25" wide. I didn't get a picture still installed(at our cabin, but could get them later if absolutely needed) The window sash is 28.5" wide. I haven't weighed them, but they are a small bedroom window. Maybe you can d ... (cont.)

Hello - I have a double-hung Simonton with a 1999 mfg. date that has a broken spring balance on one side. Can you provide a recommendation on parts to replace?

Looking to replace coil balance and pivot shoe, but unsure what parts are compatible. Seems like this particular setup is either discontinued, or just hard to find.

I am looking for replacement pivot lock shoes for my 1996 Simonton white vinyl window. The attached photos of my original lock shoe shows the top length is 1 1/4", the height is 1", and the width is 1/2". My original shoe looks to be the exact same size, design, and shape as the Swisco 15-111 pivo ... (cont.)

Hi, can you please provide the part numbers for a balance plus pivot shoe and coil support for both sides of a double hung window. Thanks and let me know if you have any questions. SM

What is the part number to replace the pivot shoe in the pictures above?

Window spring latch

For residential tilting windows by ACAN. Installed in year 2000. I need two of each.

Looks like a 3-in white plastic housing with two screws one of the center one at the bottom that hold the metal bands that come down to the part that attaches to the bottom of the window allowing it to pivot

i watched your replacement video and that looks exactly like what my window needs. From what i can tell i need to order the series 140 balance system both right and left side. The channel is 1- 1/4 wide and the window weighs about 11 lbs at best. The spring failed and now i just use the window witho ... (cont.)

It's used to up and down the window. I want to replace it since its broken