Viewing all customer Discussions for:

15-129 Pivot Shoe, 9/16" Thick

Will you be able to find out a part number based on the attached picture ?

The etching on the glass shows EAGLE, low-e4 272, igcc/igma, Nfrwc ewd-n-076, cig3.1 2-08. The shoe and pin are broken on both sides. I have included pics from a window of the same size that are not broken to show you the parts that are needed for reference.

Can you please help me identify which spring balance and pivot shoe to purchase? I have aluminum tilt single hung windows. They are M I windows from 2001 that used a string and spring system. The outside casing of the spring balance is Marked "33C". It measures 33 inches long from the top of the whi ... (cont.)

These measurements were made with a t-square, I did the best I could.length- 2 1/16 to the pivot pt. 2" side tip to side tipwidth 1 1/4" depth 1/2'If you need a picture installed, I can send that later. on the inside I think I see the numbers 4610108 ?That is a patent number. I think 15-35 1/2 " thi ... (cont.)

looking for a replacement part for this pivot shoe it is either an allenco or capitol window not sure which

Looking for a pau of these for lower sash

Purchased a home here in NC -18 years old. The windows have not been taken very good care of by previous owners and are very loud and squeaky even after cleaning and lubricating. They are difficult to raise and lower and some you cannot lock because the window will not go all the way down. I will ... (cont.)

Hi, This pivot lock shoe is from a spiral balance type double hung. Made by PGT window company in Florida. (Model DH 560 series) Hurricane impact glass. (Discontinued, and PGT is of little help). Do you have these, or know where I can get them?

I need replacement parts for windows for a farmhouse. But I am unsure of the brand name of all of the windows. Can you help me? Your help would be most appreciated! I need latches for the top of the sash, the shoes and also some of the balances. I'm having trouble finding a brand name and part numbe ... (cont.)

Hello, I am replacing some parts in my spriral balance windows. I identified the pivot bar already used in the system as 26-352 and pivot Shoe as 15-129 by size and shape. Could you please confirm they are compatible.

I am in the process of selling my house and have a variety of windows that open, but will not stay open. I believe the part that needs to be replaced is 21 inches in length, but I have had a trouble finding replacement parts online. The vinyl windows are about 20 years old. I also need a few of the ... (cont.)

Can I use the 26-450 Pivot bar with the 15-129 Pivot shoe?

appreciate an ID on this item.

Hello I've included pic of stickers on my 16 year old windows and the balance shoe and pivot bar plastic housing. I'm confident I found the housing on your webpage, https://www.swisco.com/housing/pd/Tilt-Window-Replacement-Sash-Pivot-Bars/26-451 But unsure of what balance shoe to buy and install. ... (cont.)

Good Morning, I'm having a repairman fix older Vinyl Double Hung Windows that unfortunately have been discontinued. I was lucky enough to have been given some spare Provia parts that are working well as substitutes for the Originals but I'm having trouble finding more of the same parts to fini ... (cont.)

I have a pivot shoe and pivot bar, both broken. Patent number included on both. Need replacements

9/16 x1"14 x2" What replacement do you recommend

Maintenance super at a property having trouble locating these specific parts. Tilt window balancers 28 inches long screw hole on top of balancer/ eyelet and plastic bushing on bottom end Doesn't use eyelet though it pulls past slot on top of pivot lock shoe and wedges in looking for pivot lock s ... (cont.)

I purchased 26c window channels and pivot shoes, photos attached. Pivot shoes will not slide in current Comfort View window 32 1/2 w x 28 1/2 h tilt window. Window channel appears to not fit my pivot shoes that are currently in place, photo attached. Need help, Thanks Roger

The metal part of the balance is 35". The pivot shoe is 1 1/2" wide, 2 1/16" tall 1/2" thick. 3500 is stamped on the balance.