Viewing all customer Discussions for:

15-129 Pivot Shoe, 9/16" Thick

Hello I need to replace 4 window balance 29" with 298 or 29d

Hello. I have a couple of Winnova double hung windows with broken cams> It's the part that rotates so you can lift the windows out. I haven't been able to find anything searching the internet and the windows are older(were in the house when we purchased 10 years ago),appreciate any help you can ... (cont.)

This is the pivot foot on each side of each window. It is 2" tall x .75" wide. Not sure if these are even made anymore. These are for tilt windows. I can get better measurements by removing the shoe if needed. These windows are circa 2000 and the brand name is unknown.

Hi, So glad I found SWISCO! I have vinyl windows that use the 770 balance with option 34E and the 15-129 pivot shoe. The windows are about 17 years old and it appears the vinyl/plastic has aged enough to break in many places. When looking at another window to plan my work one of the little sliders ... (cont.)

Hello. I have windows that are ~20 years old and the spring balances are starting to break. The markings on various windows around the house are 24c, 24d, and 32d. Based on my review of the information on your web site, it appears that I should select the Series 770 channel balance and the 15- ... (cont.)

Hello,I need two of the bars. And two of the other. I am not sure of the proper names. The long narrow pc. of metal ( I don't know the name of it) but its the metal pc. that sticks out on both the right and left side of the windows. Its 3 inches long with 3 holes in it.Thanks - Rocco ... (cont.)

Good evening. Can you help me identify three parts on my windows? I need to replace some spring balancers, the shoes, and some latches that release the window from the track. Thanks!

unsure if i need to replace the balance or just the channel

4610108 will also need a balance. Replacement parts Will need 22 and 24 inch balance. Thank you

Window is small 18"x33 1/2", I have replaced larger windows balanceand these two small windows are no longer moving easily. I have ordered from you before. My name is Patricia I will need four of these along with the shoes that go with them.

I need to order these parts I'm looking for the best replacements for them

i was told that silver line made the windows. house was bulit in 2004 i believe picture on left is where pully is. 2nd one is on bottom of window where attaches to pully

Hello. I have Integra Windows from Sugarcreek Industries that are approx 20 years old. I do not have the specific model of the windows. I have multiple windows in which the pivot shoe has broken. I can't determine what the replacement is. Can you help identify which one I need. It appears to b ... (cont.)

Pivot bar for Lockheed window. 3 inch, about 1 inch between screw holes. Head is 7/16

I need to replace these ( subject above). My windows (3 if them) are single hung, the removable window is 36 lbs. They are about 30 years old, vinyl windows, and I believe Hurd brand although I dont know if they are still around. The channel balance is not clipped to the side, it is screwed in at ... (cont.)

Hi Swisco,Do you have the attached shoe in 1/2"? I purchased the 9/16 but they are too tight and the shoe does not travel easily up and down the casing.I also need to order a new casing. Do you have any idea who sells side jamb casings?ThanksDeb

only marking is a patent # 4.610.108 size: 2" x 1 1/4" x 1/2". Looks closest to 15-179 but has a screw hole. I have ten windows that need new parts. Thanks.

I have a customer looking to get a pivot shoe for window in the attached pictures.

Hi,How do I measure the attached shoe to select the correct one from your site? Thanks, Deb

Hi,I have a window that the weights are broken and I'm assuming the spring as well.Do you have replacements for the weights and the springs?David