Viewing all customer Discussions for:

15-144 Coil Bushing Cap

Please see the attached. The shoe measures 9/16 ~ 5/8" x 1-7/16" As you can see, the knotches has two knotches. Looks like I would have to replace the springs and shoes. Any suggestions? Eric

I need replacement part. 9/16 thick. 1 1/4 wide. Series 500a dh. 7 pound. I need 4 parts

We are looking for replacement coil balances they is a number 5 marked on the coil, but the plastic hardware looks more like your #4 The coil has an open end that we did not see on your website. As shown in one of the pictures one sets on top of the other but does not seem to be hooked together, ... (cont.)

I need 2 constant force window balances for a Masterview 3-0 x 6-0 single hung window, coils and reels. Please call asap Thank You Dan

I need to replace several broken coil balances in Thermolite windows. I've attached pictures of one that I have removed that still works. In photo #2 there is an 8 stamped on the coil. Can you help identify the appropriate replacement parts that I would need to repair the window? Also, the coi ... (cont.)

My windows are Weathercraft series 3000 vinyl tip in, first pic shows what it SHOULD look like..the others are the actual top and bottom pieces as well as the balance itself. It is 1/2" wide. No markings avaialble..once removed I cannot replace the window. House is on the market for sale-for securit ... (cont.)

I'm looking for the coil balance that would go with Coil Bushing 15-143 and Coil Bushing Cap 15-144. I see it says Use with Series 150 and Series 152 coil springs, however those coil springs don't match up to what our customer has. I've attached several pictures that will hopefully help with ident ... (cont.)

My window sash will not stay up. Coils are damage pulled out from shoe

Hello, I am trying to replace the coil balance for a customer. Below I have attached a photo of what it looks like. For each window, there are two coils on each side. The one coil has a 6 stamped on it and the other has a 5. The coil marked with the 6 matches the Series 150 coil balance but I ca ... (cont.)

I am trying to locate replacement Pivot Lock Shoes for vinyl windows that are about 12 years old. I attached a couple of photo's with the spring still attached to the shoe. The dimensions are approximately: 1 7/16" x 1 1/4" x 9/16". Please let me know what you may have available that I can try ... (cont.)

I have Alside Excalibur windows. The coil balance has broke on both jambs. I can not find a weight etched on the coil. The only thing that is on it is a lower case k. So, I am not sure which coil to purchase. I will also need 1 replacement cam and 2 replacement pivot bars. It looks like the bal ... (cont.)

Hello I have damaged balance .I believe its a coil balance. How do I diagnose which balance is correct one on your website? Also pivot shoe is broken. Thanks Jason

I need to replace one of my coil balance shoes but dont see anything exactly like mine, so, I think that i can replace both sides with #15-158, S152-8, 15-143, & 15-144 would you agree?. i hope the pictures are good enough and my coil has an 8 stamped on it. thanks for your time and trouble, da ... (cont.)

I believe this is from a plygem replacement window. I had an item # from one of the other windows and google search of the # led me to believe plygem made the windows. Size is 1 1/4 wide, 1 5/16 tall, and 9/16 deep. uses a series 160 coil balance. Thanks Brian

I need 6 to 10 double coil balence sets for Windgate double hung tilt in windows by Alliance. The width of the sliding portion is 1.25 inches, and contains a pot-metal rotating receptacle for the window pin. Two coils are attached.

Hi, I'm trying to match these coil balances for a 20 to 25 year old window that weighs 12+ lbs. The number 6 is stamped on the coil but no other letters are visible. The coil is 1/2" wide, the pocket is 9/16" deep and around 1-1/2" wide. The coil has a hook on both ends which doesn't match your ava ... (cont.)