Viewing all customer Discussions for:

15-150D 1/2" Coil Double Support

No numbers

Spring shows #5.5 39" 220998

Coil cover is1/2 inch thick1-3/4 long1-1/4 wideBreak shoe is 1-3/8 long, 1-1/4 wide1/2 inch coil 9 lbs

Metal coil has USA pat 5232208 and Omega #5.5 64" No info on white part Have different sized windows throughout the house.

Cams and balances for 31.625 x 61 1/2 : 32 x 62 35.625 x 53.5: 36 x 54

Attached are pictures of the coil balance for my window. These pictures are from my window that weighs 23lbs. I also have another window that weighs 18lbs. and has the same problem where the coils have broken. The coils have broken on both sides of the windows. The plastic cover and the shoe are in ... (cont.)

1998 Simonton see pictures and make sure I got correct numbers. 1/2 coil S160-06. 15-191 shoe 15-150D support, which looks different.

Coil spring broke on right side of upper sash. Spring is 1/2 inch. Double spring. Only number I see on spring is stamped "3". I would like to replace all parts related to coil balance.

Sent this post, I think your answer was under promotions and I lost it. 1/2 coil Double coil holder. Sorry about that.

Balance is 1-1/4" wide, 1/2" thick. Writing on the spring says 35", 7.5#, W2H. Part numbers are visible, I have shown those in pictures.

Hello my window has been taken apart by a repair man that never returned to complete repair. I am not exactly sure how it all looked before disassembly? I will send pictures of all parts . If possible are there any videos on these double coil repairs?

two holes pivot bar- please help to identify the right part for purchase

I need replacement springs and shoes for the window balancer parts shown in the attached images. Details of the markings on the existing parts are shown in the pictures. The balancer itself is marked with Part #801020. In one case, the internal coil spring is marked #7.5, 35" -- I interpret this t ... (cont.)

I am working on a couple of Simonton windows with coil balances. one is a single coil stamped 5 and the other is a dual coil with the lower coil stamped 4 and the upper coil stamped 6.5. Which coil balances should I use?Thanks, Robert

Hi there, My home was built in 2000, and I have single hung windows throughout the house. The coil balance assemblies are in varying states of failure, and I'm hoping to be able to replace them. I came across your website and am hoping you can help. I am not sure who the manufacturer is for the win ... (cont.)

Hi there,We are in need of replacement parts for our double hung vinyl windows. We are not able to find any identifying information on the windows. The shoe part measures approx 30-32 mm W, 25 mm H and 12mm D. Clearly we are also in need of the spring as well!Please advise if it is also suggested ... (cont.)

This is a heavy window, the coils disconnected from the shoe.

Dear Swisco,First: THANK YOU for your site. You've helped us immeasurably. Could you please identify the parts above so we can get our window working again? It's a Milgard, we think Tuscany V400, double sash. The lower sash doesn't move up and down. The dimensions of the lower sash are: 24.5 by 30.2 ... (cont.)

hello, the only numbers I could find on the coil balancer is0m137 on image on window part #34.610.108 on the 2 coil covers on image part #2Thank You, Todd

I have 1 Simonton window that needs the coil spring, pivot shoe, spring cover and pivot bar to be replaced on both sides of the window. Also have 1 window where the tilt latch needs to be replaced. I also included 2 pictures of the Simonton model.Not sure what part numbers I need to order.Thank you ... (cont.)