Viewing all customer Discussions for:

15-173 Pivot Shoe, 9/16" Thick

27B markings found on it.

I purchased the 15-046 for my window. The height and thickness are the same as the broken one (2" X 1/2"). However, the width for the one I need is 1" and the 15-046 is 1 1/4". Is there a pivot shoe available that is 1/2" thick with a height of 2" and 1"wide?

Looking for new shoes.I need 1" wide, maybe 15/16". 1/2" thick. 2" long. Closest I find in your listing is 1.25"wide. For spiral balance.

I need to replace some spiral balances in Better-Bilt aluminum windows (tilt), circa 1995. Looking for guidance on which balance will work. These are 28" length but no color on the tip but the cam on the shoe is blue. It's a heavy window, with the sash measuring 45"W X 30"H. Without the vinyl co ... (cont.)

The metallic portion for holding the spiral is missing on one side of the balance shoe assembly. Can you please let me know if I can just find the metallic part or do I need to change the entire balance shoe assembly. Please provide me the part nos. for the whole assembly and the metallic part if po ... (cont.)

I need part number for Pivot Shoe, 1/2" thick, 15/16" wide. Similar to 15-046 but 15/16" wide, not 1 1/4" wide.

I have a number of windows where the sash balance and pivot shoe are failing from corrosion. We are near the ocean in Fl. The balance has 27D stamped on it. The channel is a true 1/2" deep not 5/8". I need 22 balances and 22 pivot shoes. I measured the pivot shoe with a caliper and it is 17/32" thic ... (cont.)

my balance has a blue tip can I use the green color tip

Hello, I have attached photos of my pivot shoes, and wanted to see what you have that may work for me. They measure 15/16" w x 2 1/8" h x 1/2" d. They are in a 1996 Kingswood. I know your 15-212 is close, but want to be sure so I don't order the incorrect one's again. Thank you so much! ... (cont.)

These are better built tilt windows. The 15-211 cam is deeper than what I have. Please advise

I ordered 4 Pivot shoes for repair of windows---In checking I find I ordered wrong size pivot shoes. I have enclosed some photos of old shoe in window and photo of side by side comparison of old and new shoe. Measurements of old shoe is thickness .538"----Width .964"-----and Length 1.953". Hoping yo ... (cont.)

I need both coil balancers and shoes for this window. I don't see a manufacturer or weight on the window or balancers. The sash weighs 20 pounds though.

This is my old part ... it measures 1" wide x 1/2 thick x 2" high I cannot identify a replacement shoe

I have looked for hours and can't find any 1" wide pivot shoes. All I find are 1-1/4" wide. Please help s I need 4 by Tuesday.

Hi Swissco Customer Service, I have a couple of aluminum windows that do not function well due to the spiral balancer & pivot bars, need your help please identify the part number for the pivot shoes. Also, if you have any advice best way to remove the shoes from aluminum frames would be very helpf ... (cont.)

I'm replacing pivot shoes in tilt windows with 30 inch 600 sprial balance and I found that the mating parts in the window sash are rusted and broken and I would like to replace them but don't know the part number, i would also like to replace the broken top slide lock spring part shown in the photo ... (cont.)

My pivot shoe looks like your product code 15-946 except mine is 1" wide not 1 1/4" wide do you have one

Please help identify the shoe for a spiral balance that is 29"

I can't seem to find this size pivot shoe on your site. I need 16 of ones this size

I bought the 15-045 shoes but they won't fit into my jamb channel. Do you have anything thinner?