Viewing all customer Discussions for:

16-002 Take Out Clip

I have a 27" long balance stamped "26c". I was told that it is approx a 30 pound window This is for a non-tilt aluminum window. Is the correct channel balance the 2630? Also, I need the clips. I have attached a picture of where they attach. They were metal clips and there are two rectangular ... (cont.)

I have a home built in 2005 with single-hung CertainTeed vinyl windows. Had one of the channel balance take out clips break (and several more look like they are on the verge of breaking) and was wondering if your Pan Am Take Out Clip Product # 16-023 (of even the metal one if not this one) will work ... (cont.)

Replacing channel balances and retainers clips in old Jordan windows (house built in 1991). Appears the best choice is Series 390-29 Option 2840 at 29". Retainer clips are #16-002. It appears one window has original balances with stamp in metal of: 28 4c J Second window balances appear to be repla ... (cont.)

We have a couple of windows where the balance has broken and is sticking up out of the channel. I haven't forced it but can't open the window to remove and/or replace. Pictures attached. I need to order new sashes and figure out how to remove the window to replace them once I order the correct si ... (cont.)

Hi, I talked to Steve just now so here are some pics of both ends. 1620 is stamped on the side and it is 1/2 inch x 17 long. Your shoes measure 1 inch..the 15-004, mine are shy of that by 1/8 inch..maybe worn I don't know. Thanks so much, Kathi

The length of the metal channel is 20 5/8", the width of the channel is 9/16", the depth of the channel is 5/8" I also need two replacement 1/4" metal release clips

Also have Alenco windows but the bottom sash does not have a tilt window latch. How can I take out the window so we can have the glass replaced? I could not find the mechanism to release the bottom sash or am I missing something?

I am ordering S385-32 option 3140 Does top and bottom sashes use the same size channel balance?

The window is a non-tilt. I believe it was made by Florida Extruders. The balance is 29 inches. There appears to be "28C USB" stamped on them. Attached are pictures. I broke the take out clip and need one of those also.

The balance has writing that is not too clear in the picture, but says: 29 9 HW CMC 11. There are no numbers I can see on the end pieces ( I need 2 of them for the top left and right of the window. For the latch, I did not take a picture of the broken one, but a picture off the adjacent window. I ... (cont.)

I need to replace both channel balances in my window. While I was taking them out the take out clips broke. I will also need that too. From a video I watched it looked like part # 16002 for the clips. The only number I found on the channel balance was 2730. The balance is 29 inches long and 1/2 ... (cont.)

I am looking for the part numbers for these balances and attachments shown in attached pictures, stamped on the rails are 2420 on one and 1820 on the other. Please let know so I can order. Thanks Bill

Hi, I need help finding replacement springs. I have included a couple of photos. The old part is marked 26DS, sideways BSI or BSL (not sure) and then NL 32. I have included the end fittings in the photos too. The length of the metal is 27", the width is 1/2" and the depth is 5/8". I also need the ta ... (cont.)

I have two styles of window, each with a different balance length but same shoes and tops on each. Both balance bodies are 9/16 inches wide and 5/8 inches deep. The first style of balances is 20 5/8 inches long; the second is 26 5/8 inches long. The springs keep binding or popping out of the ... (cont.)

How do we determine the manufacturer of the windows in our 18 year old home? I found a lable with this info: DH-C30/DH-C35. We are in need of a guide piece which should be located at the top of the slider section and guides the window in the track. Thanks

When installing 8 (order total; all same type of the aforementioned), these 5 channel balances broke upon usage when installing in window. two broke at the top, much smaller pieces, the other three severely damaged the pulley system and snapped. Never had problem with Swisco parts before. ... (cont.)

Hello I am looking for what u believe is the sash of a unprimed window. The first picture is the part I need that says 2830 on it. It is from the sister window of the one that is missing this part. Any assistance would be greatly appreciated

The top sash guide for my window (H-LC30-53-96) has broken on both sides letting the balance springs pop up making it difficult to open the window. I need help finding the correct replacement parts (top sash guide and pop-out clip)

Hello, You guys helped me identify the spiral balancers I needed in my previous home I just sold and hoping you can identify what I need for window(s) in my new home. I cannot find a manufacturer name on the windows so I cannot provide this detail. Hoping you recognize the window or the spiral bala ... (cont.)

I need balances for 8 windows, they measure 34 inches (just the metal) and have the attachment as noted in the photo. The windows are large, single hung, no tilt, shashes measure 44" wide, 36" tall, double glass. I think they weigh about 35-30 pounds. The Balance has a stamp of "33 DS 38" on it. ... (cont.)