Viewing all customer Discussions for:

82-218 Mortise Lock, Round Face, 3-11/16"

Here is the pictures and measurement of parts we are looking for. See attached.

Looking for sliding glass door locking mechanism. There is no numbers on the part. See pictures.

Hello, I have a sliding door sgd-r20 96x80 Sgd-r20 72x80 The latch is broken and has slid down inside the door so I cannot send a pic. But the door is 1 inch thick. The latch would need to fit inside a 1/2 inchx 3 1/8 inch cutout. Its 3 9/16 from hole to hole. Would you have a martie lock for this s ... (cont.)

Hey, I just bought a house and there is a Pella sliding glass door at Living room with a Pella sliding glass door handle, but there is no catch at the jamb. The previous owners were just using a surface type add on bolt to lock the door. There has never been a catch installed on the jamb itself beca ... (cont.)

Hi Dave, My lock assembly is acting up - I've got to fiddle with the swing down catch to get it to lock the door... I'm thinking of replacing the whole assembly and want to make sure I'm getting all the parts I'll need.... Attached are pictures of the parts - please let me know what I need to or ... (cont.)

I need the inside handle plate only for a sliding door handle. The plate has the following names and numbers: SASH CONTROLS IND DETROIT 20, MICH 060-12555 The handle is probably from the mid 70's Door attachment screw holes are 3 15/16" apart Handle attachment screw holes are 4 15/16" apart I need o ... (cont.)

Looking for a keyed lock for Pella sliding door. Vinyl

I need a replacement patio door handle. The info from the handle is SASH CONTROLS, INC., 060-1255. 4 inches between screw holes. Thank you.

Could you be able to help me with the following parts for sliding doors? can you fine these double wheel assembly ? they fit a 6? opening of the bottom of the door the following are for the handles of these in black or stainless steel? they are approx 9? H x 1 1/2? W

Please let me know if you can provide a replacement for the attached sliding door lock. The only markings on the lock are ?DNS Miami Florida ?.

Hey I called in to buy slider door lock. I'm attaching photos of the lock. Also we have a gap at the top inside of the door and didn't know if you guys sold any pieces for that. There is photos of it as well.82-218 mortise lock is what I think we need.Thanks for your help.Cheers Byron ... (cont.)

I need lock mechanism for my silver line sliding door

Lock on the patio slider is broken Looking for a replacement Thanks

The mortise patio door lock has failed. I need help to identify the correct part. I tried to upload some photos, but this website wasn't responding when I clicked the RED button. I can E-Mail the photos, pretty easily. It may be that our server here is blocking your website from opening a pop up to ... (cont.)

Dear Swisco, Am actually looking for the actuator arm, broken piece in the attached photo. The arm is 1-3/16" long x 9/16" wide and must fit through a 1/8" opening to accommodate up/down of actuator arm.Any assistance greatly appreciated.Thanks,John

Unable to find at Home Depot, they referred me to your company

My door is the sgd-r35-72x82 . I don?t know which handle replacement would work.

This is the original latch is from a sliding glass door installed by the builder approximately 7 years ago. What is the replacement part for it?

I need to replace the sliding door handle latch assembly. The hook does not extend out to catch. You help is greatly appreciated.

My sliding glass door (circa 1972) with Air-Lite handles needs replacement handles inside and out and mortise. Please see attached 11 pics. I will call you Tues May 29,2018. Thank You, Jean