Viewing all customer Discussions for:

82-226 Mortise Lock, 4-5/8"

I'm trying to replace at least the center portion of this door lock. Would you have any information on where purchase replacement parts? any help would be appreciated.

I spoke to you over the phone today, and am sending you some pictures of the door to deck that I need to reorder. I just need the guts of the door latch (you had mentioned it started with the letter (m)... sorry, I forgot the name of it. The distance between the two mounting screws is 4 inches. T ... (cont.)

looking for this handle set-home was built in 1988. all I can see is patent number 3596954 and cdn patent number 919213

I tried to replace my mortise with your 82-218. As you can see, it looks identical to me. However, in addition to being very difficult to get the old mortise out (that's how it got damaged), I can't get the new one in. it looks like there's a bar running up the back of the mortise cavity, maki ... (cont.)

I need a replacement lock set and handles for a patio sliding door about 30 yr old. The part number is : Sash Controls, Fermdale, Mich. 1050-452

I think it's a Simonton door but can't determine the model. It's from a 6' door manufactured in 2004. It looks a lot like your 82-226 from my measurements.

I am looking to replace the locking mechanism which is marked Sash Controls Inc PT.NO. 1060-452.

We have a number of Craftline sliding glass doors whose locking assembly is beginning to fail. Attached is a photo of the part and drawing of the part from the original instructions. Does this look like a part you would have in stock? Thanks, Michael

The broken lock mechanism is gone - we have tried several that looked like they should fit but were too big - any ideas?

I'm looking for a replacement latch for my sliding glass door. I have attached a picture of the latch that is in the door. The only marking I can see on the unit is etched into the window glass. It is AFG C754. Please let me know if you have any clues on what make/model of door this broken latch is ... (cont.)

Door Handles that needs replacing Distance between the outer ridge of the two screw holes 105mls The door handles is comprised of four parts:- External door handle - 2 screws 150ml length - Internal door handle Defect the screw hole is worn and has started to deteriorate causing the handle to ... (cont.)

Which lock/handle do you recommend to replace this lock in which someone enlarged the opening incorrectly. I am able to enlarge the lock opening slightly to get a larger lock to fit. Thanks, Larry

I have a sliding french style door and the lock set no longer works. The latch does not move up and out to grab the mounted piece. I attached a picture. The only marking on the lock set is "DNS". The box with DNS on it is 4" long, .5" wide and 1 and 1/8" deep. The tumbler including the bar that ... (cont.)

Need a new lockset for my patio door.

The mortise lock on my patio door fell into the patio door and I am unable to retrieve the lock. I now need a replacement mortise lock but I am unsure of which lock will be compatible with my patio door. The model number on the sticker on the door is Series 910, SGD-R30-145x82. Please help me f ... (cont.)

I'm pretty sure the mortise locks on my Cardaco sliding glass doors are the same as your Product Code 82-226 (although whoever installed this one put it in upside down). They also failed to install keepers for both locks. What keepers can I get to go with these locks. I'm selling the house and the ... (cont.)

I'm contacting you regarding needing a replacement lock for our Philips vinyl sliding glass patio door, series 870,model: CCMC # 12765-L.the lock has broken and am in desperate need of a replacement. I looked on your website & it looks like from what I found, that it might possibly be the morti ... (cont.)

Hi the lock pictured is broken, it caves into the inside of the door when closing and the latch can't reach past the catch on the frame. I'm not sure if I can replace just the lock or if the entire assembly needs to be replaced.

the door is 1.5" thick, the distance between the screw holes for the handle is 3 15/16" The screw holes for the latching mechanism are close to 4 5/8". The dimensions of the latching mechanism that sit inside of the door are: 1/2" w, 3 3/16" h, 1" d FYI, I don't need an external key hole; in ... (cont.)

Need a lock for my sliding door not sure what part I need to order. See photo image for view. Thank you for your help.