Viewing all customer Discussions for:

19-005 Channel Balance Top, Winged

Can you please from looking at the attached pic what parts I should order for my broken channel balance windows. The length of my channel is 27". From looking at the series 380 and 385 it looks like I have a 19-905 top with 15-002 bottom? Thanks, Vio

These are the markings on the part. (04/03)UNIQUE 31-D-40 This is a 1/2 channel.

I need to replace some window balancers and there is no manufacturer identification on the windows to be able to contact them to find out what I need to purchase. I believe, from the measurements I've taken, that I need a 33" Series 385 Channel Balance with a 19-005 top and a 15-004 Shoe. The markin ... (cont.)

Hi there! I'm trying to identify the correct window channel balance cap for a replacement order. I have two different window balances on two different windows that need replacement... one has a 19-005 top cap and the other a 19-002 top cap. I'm essentially stuck trying to figure out whether they hav ... (cont.)

the metal portion is 24" long & 9/16 deep it's embossed with "23 4 caldwell LM"

Dear Swisco: I need to order two 2740 channel blocks completely assembled with balance top 19-005 and balance shoe 15-001. Non tilt window, 1/2 inch. How can I order this configuration? My bottom shoe is not flared like Series 380 or 385. My bottom shoe has the same measurements as your 15-001. ... (cont.)

metal balance end to end 26 1/4 in 19-005 top / 15-002 shoe sash weight 24 lbs.. I did not see a balance that matched, do you thanks dan

I need several replacement Caldwell window balances. 1/2" X 30" the only markings I can find on one of them is " 29 4 JP CALDWELL". Thanks, Ken

My balances are stamped "23 4 CQ Caldell" and the metal balance is 24" long. I have attached three pictures - one of the stamped info. and one each of the ends of the balances. Can you provide me with replacement balances? Bob

I need to replace window balance and I need help in identifying. Pictures Attached. The windows were manufactured circa 2002. Only markings on the window itself is the name Fisher on the window locks. The metal has hemmed edges. The balance is marked 27 3 CV CMC 1. The lenght is 28". ... (cont.)

Which balance do I need? 28" 2730 top 19-005 and shoe is a 15-002.

i need balancers for kinco windows,non-tilt markings on (1)29 3 BS1 (2) 295 BXCMC 7 THEY ARE 30" LONG HOPE THESE PICTURES WILL HELP. THANK YOU

can you help me identify these balance parts so that i can order them. and the plastic pieces for the window it self. all parts are pictured. thank you bill

was going to order channel balance top 19-005 and bottom 15-004 20"..was given mandatory option numbers of 1910 through 1940 with no explanation..not sure which to choose..also old channel balance does not have a stamped number on it...only writing on old balance is 20 3 GW CMC 11..PLEASE ADVISE WHI ... (cont.)

I have matched my existing hardware to the #S385-30" Channel Balance with the 15-004 shoe, 19-005 top (winged), 18-166 Top sash clip, and 16-082 Take Out Clip. All measurements and details match. What option will match a channel balance with the following- 29 9 EX CMC 11?

Hi, The top attached of the channel balance was broken on both side and the string was broken on one side. Here is the measurement of the channel balance: non-tilted window 1/2 wide X 28 inch long. The number on the channel is 2730 BSI. The top attached looks like 19-005. I want to replace both cha ... (cont.)

I need to replace a 1/2" channel balance, but cannot find one that exactly matches. This is for an Atrium non-tilt window. The upper guide has wings, but the lower guide does not. See attached photos. The metal channel is 27" long. The stamp on the balance is 26-4 JX CMC 7. Can you please help? ... (cont.)

I have several windows that need new channel balancers. (1/2inch) First set says 32 4 AN Caldwell Second set says 26 4 CN Caldwell Do sell replacement parts or have any way to cross reference these items to something sold today?

Hi I end to replace 2 sash balancers that have following imprinted on them "12 5 KR CALDWELL" The sash weighs about 16 lbs, and the channel is 13" long by 1/5" wide (9/16" actually). Based on this info, I believe I need 380 series balances. However, I am not 100% sure about the top and sh ... (cont.)

I need a 24" channel balance . Here are a couple of photos. Could you please direct me to which replacement I need. It is a non tilt Milgard. Approx. 8 ounces. Thanks, DA