Viewing all customer Discussions for:

19-005 Channel Balance Top, Winged

Not sure of the weight I should order. The only stamp on the metal is 29-4. The metal part does measure 30 inches

The channel balancers have a stamp on them reading 20C bsi They are non tilt , single hung with aluminum sash They are 21" from metal to metal The shoe is 7/8", and we would need 3 pairs so 6 in total.

I have aluminum non tilt windows. Balance loook like your Series 380 o0r 385, but my shoe is only 7/8" deep like your 15-029. Can I get that shoe. I need 4 balances, 29" long metal, Stamp says 28 B.

Hi guys, I have a window balance that is super close to what I see on your website but is not exact. Particularly in the lower shoe. I have attached a couple of pics to see if you can help me identify them. These are 1/2 inch channel and 29" long (just the metal). I also need a couple of new wi ... (cont.)

Two -2850 channel balance with a 19-005 top and 15-029 bottom custom Two. -1/2 top sash guide 18-180 white6 feet white vinyl glazing bead Florida extruders 55-194-6 white slider slicker track lubricant 75-077

I think this is the S385-27 based on the fact that the bottom piece is wider than 1", as in the photo. Please comfirm so I can order the correct item (x4). Thank you.

I believe that I need the #380 channel balance. The length of the metal part is 24" and the width is 1/2". The #2320 is stamped in the metal. The depth of the shoe is 7/8" so I think I need the #15-029 shoe. I would also like to order the #16-002 take out clip and the #18-018 sash guide. I would lik ... (cont.)

I need some window parts identified please. You will see the windows by IMG_3140 are Alcan. I need Sash Guides (picture attached) and a Channel Balance (picture attached). The Channel balance is stamped "3635" and the metal is 37" in length.

I need (2) balances # 2330 24" long with 7/8 balance SHOE # 15-029 and balance TOP # 19-005. I need (2) balances # 2930 30" long with 7/8 balance SHOE #15-029 and TOP # 19-005 I need (4) 6' long weather-stripping part # 55-092 (white) " " (1) 3' long weather- stripping pa

Need two of these. 24" long marked 2330

37 inch x 1/2 inch I have 4 broken, so please quote qty 4

Hello. I have a channel balance that is similar to the one posted here: https://www.swisco.com/discussions/28B-77-131964 29" metal to metal, 9/16" wide, 1/2" deep However mine is marked "28B USB" instead of just "28B." Per the comments, this channel balance is probably my best bet: https://www.s ... (cont.)

Please see pics of channel balancer needed. It's 30" long stamped 2910F5. I think I need a 7/8" shoe on themt #15-029?.. Thanks! John

I am looking for the proper part to replace with balance part for a non-tilting window sash. Can you help? I measured the sash that the channel balance is used for and the length of the sash is 30". I also measured the full length of the channel balance that I have including the plastic end pieces ... (cont.)

Length of metal channel is 34", marking as in photo, caldwell 33 3 HO. Weight of window removed and weighed is 20.5 lbs. Winged end pieces as shown in photo. If you can tell me exactly what to order, it will be much appreciated, Thank you, Ed

Can I order S380-30 Option 2920 with the 15-095 shoe attached instead of the one it comes with.

Hello:I just purchased a home with Simonton Windows. All are double hung aluminum single pane. having issues with one window that seems to need new guides or brake (terms may not be right). It won't open straight up but cants to one side and jams. A square aluminum tube seems to slide up and dow ... (cont.)

The channel length is 29" (Not including end caps), width is 9/16"...and channel depth is 1/2" This is a large window....roughly 50" wide. Markings are 28F. It appears to have a 19-023 top and a 15-077 bottom...but your "wings" look wider than mine. On mine...total width of end pieces at wings is 15 ... (cont.)

I was thinking I need a Series 380 channel balance but a Swisco rep encouraged me to ask for custom advice. He said the shoe looked a little small. I need four balances with a 2340 stamp and six balances with a 2940 stamp. What do you think?

I am replacing 2 channel balance from a Norandex or Alcan window. The channel is marked 2950 and is a 30" square balance. Looking at your parts on the website it looks like it has channel balance top 19-005 and channel balance shoe 15-029. I did not see this combo available on your website. I would ... (cont.)