Viewing all customer Discussions for:

19-011 Channel Balance Top

I need these items ASAP9/16 In W X 5/8 In D Window Channel Balance

Hi - thank you for your help, I couldn't quite match these up based on the photos. Metal channel length is 23", the stamp shows 22 D. If you have these available I would need 4 of them. thank you Shawn

I need to get 4 block and tackle balances as well (pictures attached). We need 4 take out clips as well (link attached). The length measuring only the metal (not including plastic attachments) is 27". Let me know if there is any other measurements of information you may need.

One of the channel balances decided to eat itself and I pulled it out to replace it. I've got 2 main snags. 1. I measured the metal channel and they are both 22" long, but the number stamped at the bottom says "27". I'm guessing I need to buy replacements that are 22, but can anyone confirm? 2. I ... (cont.)

I used your tool but there did not seem to be an option that matched the numbers shown on the part. It says 2190 GG B.S.I. 25 Pat

Broken channel balance both side, please help find the parts. Thank you

That is for Windows channel balance 1/2" width.

I need help identifying the right channel balance to order. The closest I found was S370. The bottom shoe looks like an exact match, but the top doesn't quite match because it has wings. Here are some pictures attached below. Total length is 25", channel is 1/2" and tension/weight is 2430. (Not ... (cont.)

Hi,Need 8 of these for 4 windows. House is a Del Webb in Sun City Arizona, built in 1975. Couldn't find a match from your 1/2" wide channel balances. The windows are non-tilt vertical double-hung with aluminum frame, dual pane. Dimensions approximately 71" by 23". The guide stop tab for the scr ... (cont.)

stamped 1620 length 17" top: 1/2" wide, 11/16" deep, 9/16" high bottom: 1/2" wide, 1 1/16" deep, 1" high

The window this 34DS 42 weighs approximately 42 pounds. The width at the rivet is 9/16, which I think you call 1/2' channel. The appears to be the letters B.S.I. sideways between the 34DS and the 42.

It's 1/2" x 28" tall. I need replacements 2790. No33

Metal frame single hung, likely from 1970's

The plastic parts of the channel have broken and it is only assisting from one side.I believe the channel I'm looking for is the series 370. Mine is 35" long and the lower shoe looks the same but my top guide does not have the "wings" protruding from the sides as your image shows. They don't appear ... (cont.)

I have channel balances in my windows. But I can't find these exact tops and shoes on your website. Do you have these parts?

length of balances 28 inches. width is 1/2 balance. width of the pivot shoe is 1/2 inch. the stampings on the balance is 2740. window is non-tilt. 15-001 seems to be the closest I am able to match up to my pivot shoe and the top 19-001. If you can please help me confirm that I am on the right path ... (cont.)

I need to replace the window balances. They measure 28" and they are labeled 2740. I would like to have them with the plastic fitting already riveted on the ends but I don't know which ends to get them purchased with. Attached are photos of what they currently look like. Thanks in advance! ... (cont.)