Viewing all customer Discussions for:

S380-20 20" Series 380 Channel Balance

We are replacing some 20" window balances and trying to determine the proper balance to use. Non tilt vinyl windows installed in 1997. Balances have identifiers 19 4 DS Caldwell if that helps identify the product. Thanks

Would like to find replacement part. Glass is about 45w x 23h.thanks,Rick

Hello, The current channel balances I have are 20" from end to end of the metal. It is a non-tilt window and the stamp reads 1920. Based off of looking at the plastic fittings on each end it appears to me that this is a 20" series 378 channel balance but I could certainly be wrong. I have attached ... (cont.)

19 9 FO CMC 2

Hi I need these 4 pieces (19-6-BW-CMC-2) (25-5-JV-CMC-2 ) (31-5-AW-CMC-7) (25-3-AW-CMC-7)

1990 BSI ND 19

Markings on the balance is: 19 3 IV CMC 7

Attached the pics, just want to be sure I order the correct replacement parts. PLease let me know if you need any additional pictures or information.

Need to know the length I need to order. From what point do we measure them Thank you

These are "windoor" manufactured windows

The only name is a stamp 19 4 ES Caldwell

Hi there,I would like some help in identifying the appropriate replacement channels for my sliding window.The stamp is for KP Caldwell 1940 so I'm pretty confident that this would be the 1940 option.Looking at others posts, I've found the following two likely items:S380-20S385-20The 1940 option is t ... (cont.)

20 inch channel ... part number stamped 1930 with BS1 below it

Stamp 1930 B.s.1 Pp 20" long Which part do I need?

I need a non-tilt balance.The width is 1/2 in. The length is 20inches. I believe the model I need is the s385 as the heel to toe measurement is slightly more than an inch.

Hi,Attached are pics of the channel balances for 2 windows at the front of my house.The metal frame is 20" long and it's stamped "19 5 EP CALDWELL". Each window weighs 19 lbs.I'll need 2 sets (4 total) to replace them in both of these windows. Please let me know if you have any questions or what to ... (cont.)

Hello. This balance is from an epi window, installed in about 2002. The metal channel is 20 inches long, 9/16 wide and 5/8 deep. The only stamp is included in the photos. I need 4. Thanks for your help

this is balance channel for a single hung non tilt window

19" long, stamped 1950, window made by "Viking", Weight of window section being lifted is 14.2 pounds, installed approximately 1998. I need 2 balancesCarl

No markings, Metal measures 20in