Viewing all customer Discussions for:

S380-24 24" Series 380 Channel Balance

Can you quote for a pair of replacement balance springs identifiable from photos Thanks Nick

Markings- 23 3 FW CMC 10 Do you have the equivalent to this series of balances?

Parts is for a guillotine stile window with huricane impact glass. This windows are heavy.there are three different sizes, 24", 30" and 36", each picture of the engraving is accompanied by the measurement. They all have the same plastic endings. Rhanks for your help!

I have a balance with a 2320 stamp engraved in it. I measured just the metal portion and it's exactly 24". When I measure the end with the hook, it's only 14/16" (see pics). I couldn't find a balance on your website that was less than 1 inch wide. I looked at your website options and the one that lo ... (cont.)

I have an Alpine single hung window that is missing one of the sash guides and would like to replace both of them.

I need 2 replacement channel balances for non tilting windows as per pictures they measure 24 inches long by 5/8" (the metal) the end have wings and the stamp says 2320

Iam looking for winged channel balance cmc

Do u sale these or u have another ones the same size

The measured length of the metal part is 24-inches and the width is 1/2 - inch for a non-tile window. Just not sure what style number to get (s380, S380, S395 or some other model).

I need to change this part, not sure about the weight. I cannot remove the slash

Hello, Can you help me identify these window balances? One has a broken pully on a non-tilting sash window I have. The metal channel is 24" long and it is 9/16 wide. Thanks,David

I would like to replace some of my original window channel balances and am looking to identify the correct replacement. The metal channel is 24" long and the channel is stamped with "2310". Below the stamp is the letters "BSI". I have included photos. Thanks.

Please help as I need to order a number of these.

The metal shaft is 24" long. 1/2 wide Printed number on shaft 2320 I've included pictures with measurements of the top and bottom.

1. Side with # 2: Inside with clip 3: Side view 4: Bottom end 5: Top end From a Milgard window, 28" wide x 53" high. Number stamped on side of part is "23 3 CALDWELL HM" Part dimensions (metal channel only) are 1/2" wide, 24" long

This is a Lowson Impact window 53"x 50" . Need 2 replacement balances.

I have the same as in this thread. Can you quote 2 balances?

Hello, I need to replace two window channel balances from the same window. Born are 1/2" x 24". One is marked 23 3 BS CALDWELL. The other is 23 5 CALDWELL LM and is broken at the top.

24 inches long Stamp on channel is "23 2 EU CMC 2"

Hello, I've got a window with two balances, printed "23 1 FT CMC" on the side. The channel is 24 inches long and approximately 9/16" wide and deep. I'm looking to replace as the bottom shoe slides past the bottom of the window, so possibly a beefier shoe would be better. Please advise, thanks. ... (cont.)