Viewing all customer Discussions for:

S380-24 24" Series 380 Channel Balance

Do u sale these or u have another ones the same size

The measured length of the metal part is 24-inches and the width is 1/2 - inch for a non-tile window. Just not sure what style number to get (s380, S380, S395 or some other model).

I need to change this part, not sure about the weight. I cannot remove the slash

Hello, Can you help me identify these window balances? One has a broken pully on a non-tilting sash window I have. The metal channel is 24" long and it is 9/16 wide. Thanks,David

I would like to replace some of my original window channel balances and am looking to identify the correct replacement. The metal channel is 24" long and the channel is stamped with "2310". Below the stamp is the letters "BSI". I have included photos. Thanks.

Please help as I need to order a number of these.

The metal shaft is 24" long. 1/2 wide Printed number on shaft 2320 I've included pictures with measurements of the top and bottom.

1. Side with # 2: Inside with clip 3: Side view 4: Bottom end 5: Top end From a Milgard window, 28" wide x 53" high. Number stamped on side of part is "23 3 CALDWELL HM" Part dimensions (metal channel only) are 1/2" wide, 24" long

This is a Lowson Impact window 53"x 50" . Need 2 replacement balances.

I have the same as in this thread. Can you quote 2 balances?

Hello, I need to replace two window channel balances from the same window. Born are 1/2" x 24". One is marked 23 3 BS CALDWELL. The other is 23 5 CALDWELL LM and is broken at the top.

24 inches long Stamp on channel is "23 2 EU CMC 2"

Hello, I've got a window with two balances, printed "23 1 FT CMC" on the side. The channel is 24 inches long and approximately 9/16" wide and deep. I'm looking to replace as the bottom shoe slides past the bottom of the window, so possibly a beefier shoe would be better. Please advise, thanks. ... (cont.)

Can you please help identify the balances in the photos attached. I would like to purchase a few to replace the broken ones. The block attached appears to match what is original on the windows. Thank you!

27-4

I'd like to replace two channel balances in a Window World window. Each channel balance is 24 inches long. Stamped identifier is 23 9 KU CMC 1. There is a hook on one end and a loop on the other end. Thank you.

I have provided pictures of this channel balance. It is 24 inchesd long. and as pictured has the labeling " 23 2 CR CALDWELL" printed on the side.Can you help me with part number and directions for ordering and installation?Regards,David PS let me know if you need more info.

Need to replace these on two windows.

I need to order 2 24" channel balances and the only marking is 2330

Hi! I need help finding a replacement channel balance that matches the included photos. Thanks, Audrey