Viewing all customer Discussions for:

S380-24 24" Series 380 Channel Balance

23 2 BW CMC 8 Milguard 2003 I need 8 windows They're all jammed and won't open if they open they come off and don't stay up.

Markings on balancers: 23 3 C6 Caldwell window weight: 19 lbs Length of balancer: about 25 inches with plastic ends Width: 1/2 inch The windows are Milgard Vinyl windows that slide up to open, down to close, no tilt Need to know which ones to buy and if these are the proper ones for the wind ... (cont.)

Hello, can you help me figure out which part to order. thank you

Can you please help direct me to the correct replacement: Balancer #1: Milgard Window Balancer #2: Plygem Window Pictures are annoted

You guys and gals have always been very helpful in the past so i need your help again. thanks, pete

Code: 23 4 Caldwell KL

The length of the metal portion of the balancer is 24 inches. Weight of Sash is 18.3 lbs.

Good Morning. Just purchased a condo with single plane single hung HARCAR aluminum windows. The balances were removed from two of the windows. Marking on the balances is 230 T. Look to purchase 4 replacement balances. The length of the metal channel is 24".

23 9 CX CMC 11 Need replacements Thank you

I included some pictures of the channel balance that I need . Hopefully you can help me identify the part.The back is stamped 23 4 GP Caldwell, the length is 24 in trackdon weight 17 Lbs need the part number pleaseMy name is GusThank you you for your Gus

My part number is 23-3 GA2 CMC I can not find a replacement part.

looking to order two of these. If I order, how long will it take to get? Need to know where to ship them as I will be where I'm at till the 29th.

I need two spring assemblies. One has bad roller and the other has a bad guide.

Length of metal in 24 inches Code is 2340 Width is 9/16 inches Thanks, Steve

I am looking for a bit of help on identifying the correct parts I need for a window project. I have 4 different sized types of windows. Question 1 - I have included a few pictures and would like to confirm if the correct style for these balance springs should be model 15-004? Question 2 - I have ... (cont.)

Looking for a block and tackle window balance to replace mine that have stamps: 2315 and 2915. The windows are 24 yrs old and difficult/noisy to open and close. Another issue is that the window balance gets stuck at the top of the frame, even when the window is down/closed. LMK if there's another pa ... (cont.)

need window balance -product code: S380-24 stamp 2305

I need help identifying the channel balances on my windows. I have attached 5 pictures, I have plenty more that I can email, if you need them. The length of the spring is approximately 18 and 3/4 inches (compressed), the length of the balance is 31 inches, and depth and width is 5/8. There is a prin ... (cont.)

27 inches long Single sashNon tiltSo after more researchI had found the balancers that were in theWindow may have been the wrong sizeIn the window next to it it has1/2 inches wide24 inches longSame end capsWith 23 4 eu Cmc 4 printed on them

I think the dimensions are 24 1/8 x 5/8