Viewing all customer Discussions for:

S380-26 26" Series 380 Channel Balance

I need this set of Window Channel Balance for my window. The only numerical marking is 25-3 on the back side of the channel. Can you help me pick the right set from this group of pictures? The channel balance is 26 inches long.

Please help me identify replacement channel balances. Markings: 25 9 FV CMC 7 Width: 1/2" Length: 26" Thanks!

length 26" stamped #25-3 # on window sticker H-LC30-53x78

Marked on the rail is; 24 4 IQ CALDWELL

This balance is from a Philips venal window. The frame is 1/2" x 9/16". The only marking is in ink, 25 4 IQ CALDWELL. I need two.

I'm looking for a direct replacement part for the channel balance part in the attached image. It states "25 9 FV CMC 7" By chance do you have a direct replacement part for this?

The metal part is 26 inch long.

these are sliders for my front windows. I'd like to order four of them (two for each window). Please see attached pictures

Need replacement balancers for 9 single hung windows: Stamp 1920 - balancer metal measures 20"; including plastic ends 21" = 4 balancers Stamp 2520 - balancer metal measures 26"; including plastic ends 27" = 14 balancers Please help me with which balancers to order.

Looking to replace both channel balance. Thank you Lidia

Hello, I'm looking for quantity 2 block and tackle "25 4 CT CALDWELL" for "Insulate" non-tilt window. I'm unable to add photos, not sure why. But, I do have photos of the window and existing hardware.

I need to replace a couple of channel balances on my windows. I have included pictures and the channels are 26 inches in length. Thanks

I have non tilt single hung window balance to be replaced. Stamp : 25 4 KQ CALDWELL Depth: 5/8" What is the appropriate replacement? Thanks, Jag

My old part has a stamp like this. Could you check and let me know which model is right for me? Thanks. 27" 1/2 wide 26-4. BA CMC 7 Thank you. Yoon

There is a "25 4 FN Caldwell" Stamped on the side. The metal portion is 25 7/8" long. These were installed in new windows in 1994. I need 4 of these and instructions on how to install them. Thanks

I had one of my channel blocks' line break and need to replace. Are these available through Swisco, or is there another provider of them? Also, should I replace the other channel block as well so both are the same? Thanks!

I have a broken channel balance. The length of balance metal part is 26 inch. The width of each shoe is ~1 inch. The writing on balance is "25 3 DX CMC 11". What balance do I need. My window is not tilt. Also if the balance is not correct what is your return policy?

Hello, here are images of the balance I needed. I was only able to upload 5 images. If more needed please let me know. Thank you, Ron

Looking for these window balances and the top wedge pieces in the track

Three different window sizes. Each needs 2 channels. 1. 28" long stamped 27 4 D BSI 2. 30" long stamped 29 9 PG BSI 3. 26" long stamped 25 9 PG BSI My guess is that I need the 380 series. 1/2" width. The winged shoe would be 15-005. My measurement of the depth of the sho