Viewing all customer Discussions for:

19-030 Long S-Clip

Hello. I stumbled onto your site. I believe I need to replace at least 1 balance spring assembly in one of my Loewen windows. I think I make out the code as 22 HD 8 SL. There may be something like RP or FP below. Perhaps you can make it out better than I. I have not yet removed anything. So I am not ... (cont.)

Balance assembly for Marvin Tilt back, upper and lower sash. Stamped 28 HD and W 28HDThanks for your help.Peter

Recently received a S751-29 (tg28) option. Length and end are perfect but the cross section is to big. See attachment. Mine is on the left yours on right. Any options avaliable?

I am in search of balances for about 20 Kolbe windows in our establishment. The original balances is ribbed and has the stamp "26 HDdK" on it. I am also interested in researching Jamb liner replacements for these windows as well. On the side of the sash it is stamped "134-09 32x26 DHj HK LO E ... (cont.)

I need three sash replacement kits for windows referred to above; the windows fall - do not stay open. Can you help me find parts for these windows. We are trying to sell our home and came up in our inspection report to repair as a condition of closing.

please identify replacement part, cost and shipping for 3 replacement parts.

I have several of these balance springs broken,1/2'' x 1/2'' with lower tie bar guide tied to spring pulleys

It has a t16 or r16 stamped on it. I am not for sure what. It is for a weathershield window. It measures 17" long. The s clip is 2". I need two of them.

Please ID the part we've attached. It goes on a window balance.

need a 29 inch channel balance (ribbed) to fit a 15-212 Swisco Pivot Shoe for a 25 lbs tilt window (sash).

Hello, I have attached 4 photos of a window part I need to find and replace. The part number as shown on the part is DB 102 24 HD. Thank you. Jeanne

27" channel balance 26HD needed. I don't think a ribbed channel balance e.g. S751-27 will work because the sash lock must project into the jamb liner and the ribbed channel would leave no room for the sash lock. The arrangement of the rivets for the spring and S hooks in the S751 is what I need bu ... (cont.)

Hi, sorry I didn't think to get any additional information off of the window sash but I certainly can go back to the building and get more info. Can you identify the part from this photo. These "clips" have separated from the "string" type spring that puts the tension on the window sash. Thanks ... (cont.)

The balance overall length is 23 " X 9/16 " width. The window is a Weather shield double hung 50" X 24". The spring is 8-1/4", OD 7/16", wire thickness 1/16", carbon steel, hook loops both ends in the same direction. NOTE: The spring is all I really need.

Hello. I am trying to replace the Channel Balances for my Tilt Out PVC windows. They appear to be a 62A style balance that measures exactly 7/16

The balance spring is marked 32R, BSI and a small PG. The overall length of the spring balance is 34 3/4 (thirty four and three quarters of an inch) or 882mm. It is fitted to a Weathershield Wood tilt sash. The window is 11 years old. The balance has a metal push down cord brake. I also need we ... (cont.)

One of the pulleys that is part of the channel balance on my Republic double hung tilt vinyl window broke. The channel balance that needs to be replaced is stamped with 16C B.S.L. L. The channel balance is approximately 17/32" wide in the interior dimension and about 1/2" deep. The balance spring is ... (cont.)

wHAT do you recommend for this window balance system? the stamp reads (11/06)Unique 28-C-30

The windows don

Please help me identify this window balance. It is 29" long, 1/2" wide, and the spring is 16-1/4" long. Thank you, Yoel.