Viewing all customer Discussions for:

S380-30 30" Series 380 Channel Balance

Looking for replacement window balance. It is a 30" balance, 29-5 AA CMC 11 is on balance.

29 4 hx cmc 7

stamp 2950 of bs1 30 inch long channel is 1/2 inch

Not sure what balances I need. They are half inch balances 30 inches long. The markings on them are 2950 left side and 2930 right side. i have 2 windows of this size. Let me know if you need any other pics.Thanks,Curt

So from your other post from Tampa Florida, do I also need the S380-30 or S385-30? The Channel length is 30", the stamp is 2950 BSI.

Good Afternoon, Could you please help me identify these channel balances? Thanks!

Need to replace at least two windows - non-tilt channel balance. 30 inches long x .1/2 (5/8) x 9/16Thanks for your help

Has 2990 38 OK95 stamped on it Looking for replacement part number

There is no stamps on the channel balance. They appear to 1/2 inch wide and 30 inch in length. Four windows (8 balances) that measures approximately 50x32. Markings printed on the channel balances differ from window to window.

I'm looking for a replacement channel balance for my single-hung window. What is the equivalent Swisco part(s)? --ID stamp: BSI 29C --Window sash weight: 19 lbs. --Channel width: 1/2 inch --Channel depth: 10/16 --Channel length (metal only, less end caps): 30 in. Not sure about the plastic end piece ... (cont.)

I am looking for a part number for both sides of my window and the springs that go onside? The window is 51 inches wide and 61 inches in height, the metal bar that (the spring goes into I think they both fell out together) is 30 inches and the spring is 16 inches the only label inside the frame is t ... (cont.)

Need new balance

Both window balances are broken They are stamped "IMP 29 DS 38 BS1 BT " The IMP DS and BT arestamped vertically in smaller type. The metal portion is 30" long. Window is about 30# or more and swings in from the bottom when lifted without the balances.What model do I order?James

1/2" wide channel 29-7/8" long Stamped #29 6 Other numbers stamped 1S9 1B

While installing my just received (this morning) SWISCO Balance Springs it was identified that the top window sash cams are not grabbing onto the new springs. Im searching for top replacement window sash cams for my windows. See pictures for assistance:

Not counting the connectors, the metal body is 30 inchese

I need replacement load balancers. The stamp is 29C USB.

2930BSI30" window sash part. If you need additional photos, I have more. Se t a previous email but have not been contacted so I thought there might have been an issue with the emailShana

I need to replace the spring balances in multiple, 18+year old Kinko windows. The priority are the two 48x59 sized windows in the front of my house. After watching the "how to" video to remove the window, I have taken a few pictures of the balances in the window. The makings on the balance are 29 6 ... (cont.)

Looking to replace all of mine. Need to identify so I can order If you need any further information please let me know.