Viewing all customer Discussions for:

S390-24 24" Series 390 Channel Balance

Hi. The window balances that I am needing to replace are 24 inches long and 1/2 inch in width. They have 23 C written on the side in one direction and then what looks like an incomplete 3 and .S.I. written in another direction. Thank you for any help!

Hello, I have several vinyl non tilt windows that open vertically with 2 channel balances that are not sliding smoothly (jerky/stiff especially when closing) and/or have one channel balance that appears broken. I have taken pictures of one of the windows to hopefully get some advice on how to selec ... (cont.)

My window would not stay up so I removed the two channel balances. They are marked with 23 9 BSI. The metal channel, not including the plastic parts, is 24 inches long. The width is 1/2inch on the front with the writing. The side width is 5/16inch on the side of the bar . I am looking to replace the ... (cont.)

I?m needing 4 channel balancers from end to end they are 30? and 1/2? wideOn the old one is the marking23 3 IL Caldwell.Photos of the unit and both ends are attached.Thank for your help.Charlie

Hello,I am looking to replace balancing hardware on my windows as it is broken. I have few different size windows. I was only able to attach pictures for 28in length one and other one is 24inch length. Both are 1/2in channel width and end hardware is identical. Windows locking mechanism has Alenco o ... (cont.)

I need 6 of these please ! Please let me know which ones to order thank you !

Gapco Windows. 2330 24" channel balances. The top guides do not appear to be listed. The top is 7/8" x 11/16". Height is 1-13/16". Width is 5/8" Upper section is 5/8" deep, lower section is 3/8" deep. Top hole is 1/4" from top. Need two channel balance top guides. I am also ordering two 233 ... (cont.)

My home was built in 1991 and I want to replace the channel balances for non-tilt windows 1/2" wide balances total of 14 windows - 2 balances for each side so a total of 28 balances.I don't understand how to translate your product number with my channel balance numbers that I located at the bottom o ... (cont.)

Jordan window balances with the following stamped on each: 23 3 BS1 15 1 BS1 28 3 BS1 They all have the same top and bottom pieces.

I have a number of Kinco windows which I believe all need the plastic parts replaced...at a minimum the top sash guides. The windows are various sizes but were all purchased at the same time and the parts look similar w/o removing the various windows. Assuming they are the same part I need 2 d ... (cont.)

long 24 inches

I can send more photos if needed.

These are from the same window but are marked as 2220 and 2320. One appears to be a little longer than the other, but they are not perfectly straight now.

I could not find my channel balance replacement on your website. The balances are 24" in length ( the metal part) and 9/16" in width. The nylon balance top is about 1/2" in width and about 1 and 1/4" in greatest length. the shoe is about 1/2" in width and about 1" on the bottom and about 1" in he ... (cont.)

Stamped with 23 2 NL BSL

Need 2 window channel balancers #2320.

Hi, I need 4 lift assist spring assemblies. 33 B is stamped on the side. The metal is 1/2" wide by 34 long . Thank you, Mark

I need to order for all my house and this is what they look like

Need replacement parts At least 6 unit. 24" long

I am having trouble identifying which series to select. Bottom shoe measures 1-1/8". Metal length is 24" marked with 23 3 LQ CALDWELL The top piece - spring attaches to the top end - Which model balancer should I select to match to this? Thank you