Viewing all customer Discussions for:

S390-28 28" Series 390 Channel Balance

Metal channel is 28 inches. Stamp say 27 C bsi . Channel appears to be 1/2 inch wide and 9/16 deep.Need 1 5/8 top sash guide in black looks like part number18-008.S395 looks very close. Need to know weight option for C stamp. (2730) ?Can you help me confirm the model number I need? I'm ready to orde ... (cont.)

I need 4ea balance springs, metal channel is 1/2" by 28" without top & bottom pieces. #2740 stamped on side. I need 8ea of the little tiny clips the go on the sides of the sash. I need 2ea of the latches, holes are 2 1/4 in on center, opening for the striker is 3/8th of an inch.

Need some help in determining which balance replacement I need,

The bracket holding the pulley system to the metal channel is bent and broken. The channel has the number 2740CG stamped on it and the channel is 28 inches long. The spring seems to be in good shape!

I need a pair of 28" shash window balances. The ends are as per the photo's uploaded and it is stamped 2740 J.I would have bought the stock ones but they have wings on the ends protruding sideways, mine do not have these. ThanksRegardsKevan

Window measures 3 width 6 length Non- tilt Stamp 27C Measures 28 inches I need 2 left and 2 right For 2 window

Need a new Jordan Window balancer.

I am trying to install new sash window balance. My current one has markings saying 27 4 FW CMC 4. Which part number should I choose?

Hi, I need to replace two Channel Balance's, I'm not sure if I need the S351 or a different type. Numbers on the rail 27 4 CW CMC 9 length - 28" Width - 1/2" Also its not allowing mt to upload photos, its timing out. If you email me I can forward the pics to your email. Thank you Shar ... (cont.)

I have need for replacement counter balances on my Jordan windows non tilt. They all appear to have the same counter balance of 9/16" wide and the metal part is 28" long.The only numbers I can find are 27 9 and then CV horizontal stamp and then BSI vertical. The weights of the windows range from 27. ... (cont.)

I have this window balances stamped 2730 BSI, where can I find 4 sets of them with all the parts (including the Standard Guides) to fix 4 windows I have?

I need to replace this balance but having trouble identifying which is the proper replacement. The only stamping in the balancer is "27C". There is not stamping or labeling on the window sash, or jamb anywhere that can be found.

Hi, my window sliding mechanism malfunctioned due to one of the pulleys giving out. I need help ordering the correct replacement slider. Stamped on back is 2740 BSI OR (see picture).

The long part with a spring and is 29'' long keeps the window up?

Just want to make sure I am ordering the right parts. I have several windows that use the pictured part. The metal casing measures 28" and 27 3 is stamped on it. I also have 2 windows that measure 34" and have 33 3 stamped on it. I think the right parts are shown above on the screenshot of my cart. ... (cont.)

Marking on existing 27 6 CR Caldwell

Hello, I recently ordered the wrong parts from you, now I have pics the stamp is 2830 I believe they are norandex I need both 28" and 22"

Channel Balances came from an Alenco window There is a stampede marked # 2730 28" long 1/2 wide I need the left and right Thank you I'm advanced

Would like some help identify which window balance I need. 1/2" wide Metal Chanel is 28" long Has marking 2730z

The number 2710 is stamped on the side. I need 4 balances.