Viewing all customer Discussions for:

S751-17 17" Series 751 Channel Balance

Doing this for the first time, so I would like to verify that my choice is correct. Also, if you could suggest a sash stop. I am not seeing an exact match on your site. Maybe there's something else that would fit into the channel.

I am attempting to order some replacement Balance Channels for some Walters tilt-in double hung windows, from 1988, that have compression jamb liners. It would seem that the Series S751 with the 15-014 shoes are the correct ones, however, I am confused about the length. The only markings on my bal ... (cont.)

Need replacement for broken spring balance. Marking is "a 16 HD". Measured length is about 16 15/16 inches long. Thanks for your help, Dave

I am looking for 10 sets of sash balances (10 left in 10 right if different) approximately 70s vintage. They are a string and spring construction that rides in the vinyl sash guides. They appear to be encased in an aluminum enclosure. The stamping on the aluminum enclosure reads 16XHD. The vinyl sa ... (cont.)

17 Inch long block and tackle window balance with knifes edge clip attached. The balance has a 16 stamped on the front with no letter. The pictures will show that. There is no model number written on the balance anywhere. I will need 12 of these total. 4 for each double hung set. for 3 double ... (cont.)

Hi. I have 12 SEMCO double hung windows bought in 1998 that are in excellent condition with the exception that 3 upper sash balances need work. 3 of my windows are 16's with no problems. Of the other 9 windows, 9 are marked s 24TG and 3 are marked s 24HD even though they are all about the same size ... (cont.)

I would like to order a 17" channel balance for a double hung window installed in 1979 but don't know how to select from options 16R, 16HD and 16TG. Can you explain? Photos attached. My plan is to order one and see if it works. If it does I would order several more.

My balance show 28tg and has a blue hook. See pictures. My jamb liner looks different than video and does not appear to be removable.

I attached a few pictures for reference and the small stamp is almost impossible to read but that's the best i can get . The overall measurements are 17inches x 1/2 inch wide x 3/8 deep (depth of track) . Hope this helps ! Hi , i can't seems to find the parts anywhere and think i found something c ... (cont.)

I need a replacement for 2 windows that have a broken block and tackle sash balance. They are from Norco windows that are approximately 25+ years old. One measures 17" in length and has the number 16 stamped on it. The other is 25" in length and has the number 24 stamped on it. Those are the onl ... (cont.)

I have two double hung, non tilt windows weighting 14 pounds with broken springs in the lifting rails, as noted on the attached pictures. The rail is 16" long and 1/2" wide. The rail has a mark "16HD B.S.I." The rail has a lifting lug on a string coming out from the bottom of the rail. I don't ... (cont.)

Hi - I'm in search of 2 window balance replacement parts and need help identifying the appropriate part. Attached are 4 pictures. One is inscribed "HD24" and measures 25 inches from end-to-end. The other is inscribed "HD16 d" and measures 17 inches from end to end (smaller window). The issue I'm ... (cont.)

I have 5 channel balances with broken springs. Your online selection tool is clear, but I wanted to make sure selected balances will work because some of the options don't match the stamp on my balances. Here's the information. All balances are ribbed 9/16" wide and 5/8" deep. 1. 17" channel bala ... (cont.)

It has a t16 or r16 stamped on it. I am not for sure what. It is for a weathershield window. It measures 17" long. The s clip is 2". I need two of them.

Is the top clip included with this balance? If not, which clip do I need for the inner window? I plan to install this balance on a Marvin window circa 1978. Measurements and photos seem to indicate this is the correct balance. What are your thoughts?

Parts are from a double hung window manufactured by Norco. I am looking to replace 2 shoes and 2 springs. The balance is 17 inches long and a 1/2 inch wide. The spring when installed is 7 inches long.

Can I replace the Channel Balance without removing the jam? The jam removal would require removal of very nice trim that I may damage. Preference is to do it in place. Spring broke on both sides. I got the old ones out, but not sure I can hook the top. Could I use the old hook?

Do you sell the string for these balances? Or where I can get it? I just need to replace the string. And hate to through away all other good parts

I have several Marvin Window that are in need of having the balance replaced. I bought the house in 1990 with all of these Marvin windows installed by the prior owner. the balance has 16XHD stamped on it, the window wieghs 22.5 pounds. What would you recommend for replacement? Please note in pict ... (cont.)

Need help choosing an option for S751-17. Present balance that is to be replaced is marked 16D. Window sash is wood with double pane glass. Thank you for your attention, Tom