Viewing all customer Discussions for:

21-277 Bifold Track Bumper

I was told by one of your staff several months ago that I have a set of Leigh doors, and I got some parts to help fix it. However, after trying to get them working, I now realize that the upper and lower tracks are shot - really nicked up so the door pin caps don't move easily and they keep coming o ... (cont.)

The line that move in the track have no springs. I have tried tightening the screw below it but the pin keeps popping out of the track. Will replacement hardware keep the doors from popping out? Any help Is greatly appreciated

Hello I am in the process of remodeling my home and have 6 of these old closet doors. The doors are in great shape but the tracks and hardware are completely worn out. Do you sell replacement parts? Would be dissapointed to get rid of these doors. They are solid. Just old lol

#2 photo is the intact side. #1 photo show the "stopper?" assembly missing making it impossible to install the door in the upper right runner. There are no readable markings on the door which the builder says is from the late 1960's. Hope you can help. The door is 90 inches tall and 23 inches w ... (cont.)

Hi, Please help me to identify the right pin cap. My pin diameter is 10/32". The bottom diameter of the cap is 12/32" and the length of the cap is 12/32".Please see 3 images attached.From your website I bought pin cap part # 21-100 which has a internal diameter is 1/4" and thought somehow I will be ... (cont.)

I have old metal bi fold doors in my house and they no longer stay completely shut, there slightly bow out. I was told I need a spring in the top track to create tension to keep the door closed. However the part that is in the doors now, appears to have no spring and is just a rubber bumper. I pulle ... (cont.)

4 doors that are 18" each for 6' total closet opening I need the plastic tips on the pins (note that the threaded pin has a smaller dia than the other 3 pins where the tip is installed). I also need the track for the top and the mounting brackets (or track) for the bottom of the door and any addit ... (cont.)

Hello, Can you assist me with obtaining door pins and track for these late 60's-70's metal bi-fold doors please? There are two panels. each are appx 24" wide. Each panel will be installed separately for two seperate closets. Attached pictures for your reference. Please advise, need parts yesterda ... (cont.)

Hello, can you help me with finding upper and lower tracks,door locators,slides and bump stops? Attached are my steel glass bi-fold doors with door hardware in place. I need 48 inch tracks

I am replacing a wooden bi-fold doors with metal. They are 4-feet in length total with 4 panels. Have tile flooring and wanted to see if I can install this with just the top rail only and get by using a wooden bi-fold door bracket on the bottom. Let me know the part numbers that I need to buy. th ... (cont.)

I am in need of some parts for half of a 1960's era bi-fold metal door. The track is 3' long !1/16 x 3/8. Not opposed to using the 5/8 track you have if it works based on these pin. Looks like I need replacement pins as well. Thank you for any information. Bruce

I'm replacing my hollow wood bi-fold doors with metal bifold doors. I looked at the replacement hardware I would need from your thread with similar metal bifold doors. My question is, will I also need to replace my track, or can I purchase a wheel cap that will work with my existing track? Here are ... (cont.)

I'm not able to tell what track I should purchase for my metal bi-fold doors. My doors are from the early to mid 70's. Our whole house has them but the one in the family room was replaced with wooden 6 panels (junk). The previous owner left the old doors in the basement thankfully. I am able to fin ... (cont.)

Looking for replacement parts for my doors.

What do I need to make this bi-fold door work smoothly?It scrapes and is difficult to open and close.Thank you very much.MikeI will send pictures of track also. Perhaps that needs replacing too.

I need the hardware to get the door back on it's track. I want all the parts replaced and instructions on how to install it

I need the piece that hold the door shut on top rail

Do you have replacement parts for these doorstep? If so, What are your part numbers for the parts shown on these doors?

Hi! I need your help identifying which parts I need. I have three set of these doors. One on 36 inch tracks and two on 59 inch tracks. I would like to recondition these doors so they open and close nicely. Somebody at swisco showed me the 21-044. The the closest if not the se vracket would ... (cont.)

Nylon missing on guidance track pin. Door catches unexpectedly while closing/opening