Viewing all customer Discussions for:

21-402 Bifold Track, 5' Opening

I recently purchased a rebuild kit for ~1980s mirrored closet doors. I cannot get the pins to stay in the pin caps as the pins pull out when opening/closing the doors. I reversed the spring tension on the doors(top: push up vs pull down to engage pin) and the pins still will not seat in the cap. ... (cont.)

Dear Sir,We are doing renovation on multiple apartments with older metal bi-fold doors. The hardware for most of the doors needs to be replaced. I have attached pictures of one set of doors and the existing hardware. I do realize that most of the nylon bushings are missing and the pin in picture #14 ... (cont.)

Hi, I'm looking into restoring these old metal bi-fold closet doors. I was wondering if you had all the hardware needed including the rails. I'll upload some photos.

Bifold mirror doors these are the 2 openings. Are new tracks are available for these doors? We're switching to white marble tile floors and we want to, if possible, embed the the track into the floor. Two openings:72W x 80H 60W x 80hAfter measuring our pins the adjustable threaded anchor pin is a 5/ ... (cont.)

Hello, I need the bottom tracks and track hardware for a bifold metal door. Which items number is it. The width of the door is 30 inches.

Good morning,Would you be able to help me out at getting parts for my doorsI have 4 set of doors that are 4 feet and 1 that is 5 feet.I would like to buy the plastic caps for all of them.the pins look like they are 5/16 and the swivel one are also 5/16 but are smaller at the bottom where the cap goe ... (cont.)

I have installed in my Condo (1973) multiple full-VU doors. As you know the bottom track is the same as the top track-in repairing one of these doors I have replaced both tracks. My Question: the bi fold door pin cap (21-402) - in that there is a slot for the lock door pin to lock into, in the pi ... (cont.)

Hi I have a few older metal bifold doors that were installed with the pins and a track on the top and bottom. I'd like to reinstall them with new pins and new track on the top only and use a corner jamb if possible. What parts would replace what I have? The holes in the doors for the pins are 5/16"T ... (cont.)

Hello I am in the process of remodeling my home and have 6 of these old closet doors. The doors are in great shape but the tracks and hardware are completely worn out. Do you sell replacement parts? Would be dissapointed to get rid of these doors. They are solid. Just old lol

Hello I am looking for this track I have put in 2 photos 1 length is 59 inches the track width is 2 3/4 with slide opening for closet metal doors. My name is Anthony..pictures of what is needed provided in this post exactly the same way 2 needed of tracks.

Looks like I need for of the pins that help to hold the door on and the bottom track. The opening is 48" long. The track is 3/4" wide and 3/4" deep. The pins that hold the door on the top are approx 5 1/4" (plus the nub that is in the track) and the bottom pins are approx 6" (plus the nub). So, ... (cont.)

I have a 5 ft opening with metal bifold doors. I am missing the track and the support bracket that mounts to the floor on each side of opening.

I'm replacing my hollow wood bi-fold doors with metal bifold doors. I looked at the replacement hardware I would need from your thread with similar metal bifold doors. My question is, will I also need to replace my track, or can I purchase a wheel cap that will work with my existing track? Here are ... (cont.)

I'm not able to tell what track I should purchase for my metal bi-fold doors. My doors are from the early to mid 70's. Our whole house has them but the one in the family room was replaced with wooden 6 panels (junk). The previous owner left the old doors in the basement thankfully. I am able to fin ... (cont.)

Hello - we are looking for a replacement of the bottom left track for the pictured closet doors. Is the part still available and can one of the two pieces needed be purchased to replace the broken piece.

Hi! I need your help identifying which parts I need. I have three set of these doors. One on 36 inch tracks and two on 59 inch tracks. I would like to recondition these doors so they open and close nicely. Somebody at swisco showed me the 21-044. The the closest if not the se vracket would ... (cont.)

I'm repairing some old metal bi-fold doors for a customer. A cat urinated on the doors and bottom track for years and caused major rust damage. I had to add sheet metal and angle iron to the door bottom. I'm hoping to replace the bottom track with 21-402, and pivot pin 21-002. The upper track has ... (cont.)

Hello: I need help identifying new hardware for my bifold doors. I need as well new tracks. The old tracks measure 30 inches per one bifold door (4 tracks top and bottom) and 2 feet per bifold doors (4 tracks top and bottom) Thank you for taking the time to help me.

I need the top tracks and pins for the bi-fold doors in the pictures below,are these available? This house was built in 1957 and these are the original floor to ceiling closet doors

Hi friends,We are facing difficult times with our metal doors in two of our buildings. We are a non profit housing organization called MTR - More Than a Roof Housing Society and we wanna replace our tracks and pins (not the metal doors) by new ones, probably different ones... Today we use parts like ... (cont.)